Jump to content

Private block of flats communal areas - decoration - Tenders?


tllm2

Recommended Posts

 

We are looking for established companies that would like to tender for the complete internal redecoration of a private block of flats, situated just by Peckham Rye park.

The general scope of works is outlined below and the block itself is over 3 floors (including the ground floor) consisting of 22 flats in total.

Please do get in touch if you’d like to submit a tender.

Thanks


 

 

INTERNAL PAINTING SPECIFICATION –

SCOPE OF WORKS -

To include the repair and redecoration of all the walls, ceilings, window frames, fire doors and screens, skirtings, banister, balustrades, handrails, front door and frame, letterboxes and doors and frames to all service cupboards threshold to each flat, loft access and surround.

Ceilings    ·       Wash down and prepare and make good any minor defects.

·       Paint two coats vinyl matt emulsion, brilliant white to match existing

WALLS      ·       Wash down and prepare and make good any defects to the plastered artex surfaces. Any areas previously damaged by water penetration are to have one coat of stabilizing solution or sealer applied prior to painting

·       Paint with 2 coats magnolia vinyl silk emulsion to match existing. the grain

Previously Gloss Painted Woodwork

·       Remove all flaking paint and loose material back to a sound edge.

·       Wash all areas with mild detergent solution. And allow to dry

·       Rub down with abrasive paper to provide suitable surface for painting

·       Spot prime all bare wood

·       Fill any defects with suitable filler

·       Bring forward all primed areas by undercoat

·       Apply 1 undercoat to all primed areas, then apply one coat of gloss colour to match existing.

Previously Painted Metal Works  

·        Remove all flaking paint and loose material back to sound

·       Wash all areas with mild detergent solution, rinse and dry

·       Rust spots- abrade back to bright metal and prime immediately with zinc phosphate primer

·       Apply one undercoat and one gloss coat – colour as existing.

Windows and UPVC Window Frames

·       Wash down with mild detergent solution removing all marks and staining rinse and allow to dry. Thoroughly clean glazing in windows and all interior doors.

Light Fittings

·       The covers to all the light fittings  are  to  be  removed  at the conclusion of the work , washed  dried and  replaced.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...