Jump to content

LED /Halogen /CFL please help I'm going mad


intexasatthe moment

Recommended Posts

Looking for a desk lamp for an elderly person to read by .


Light on table near easy chair positioned adjacent to table ,elderly person not sitting at table .

I started off thinking CFL as looking for a daylight type light ,but all the table lamp ones seem not to be very bright .

( yes I know " bright " = minefield of luxes ,lumens ,candlesomethings etc etc . which I struggle to get my head round )


Thinking low temperature and ease of positioning .

Maybe this Anglepoise LED http://www.anglepoise.com/Type75LED.aspx.


Can people give me their views ( subjective I suppose ) on how halogen v LED work for them as a targeted /focused light to read by ?


Please help ,soooo many hours of my life being spent on this .

Link to comment
Share on other sites

I would definitely recommend an Anglepoise for ease of positioning, however make sure whatever lamp you choose it is in scale with the table it sits on.

At my work desk I have a 1227 with a CFL which provides a 'warm' light, as I'm not a fan of the 'white' light a lot of LED's give off; it's fine for working at laptop, reading and writing etc...

Link to comment
Share on other sites

The lamp has an E27 socket (screw-in) and came supplied with a 15w CFL...


7-9watt Equivalent to 40watt incandescent bulb

11-15watt Equivalent to 60watt incandescent bulb

18-20watt Equivalent to 75watt incandescent bulb

23-25watt Equivalent to 100watt incandescent bulb


The maximum rating for the lamp is 60w, so a 15w CFL is tops for this particular model.

Link to comment
Share on other sites

60w is 60w.


If the maximum rating is 60w - then a 60w CFL would be tops, not a 15w (if you could buy one.. 30w is the most you'll find, I think)


One of the few advantages of the CFL, a dismal innovation in most respects - is that you can fit a brighter CFL bulb than an incandescent without exceeding the rated wattage.

Link to comment
Share on other sites

From the GE Lighting website...


What compact fluorescent light bulb do I buy to replace an incandescent (regular) bulb?

While a regular (incandescent) light bulb uses heat to produce light, a fluorescent bulb creates light using an entirely different method that is far more energy-efficient ? in fact, 4-6 times more efficient. This means that you can buy a 15-watt compact fluorescent bulb that produces the same amount of light as a 60-watt regular incandescent bulb.


Don't worry about the math, though ? we make it easy for you to figure out which compact fluorescent bulb to buy by displaying the equivalent regular watts you're used to prominently on the package. Just look for the wattage you would normally buy in a regular bulb.


In case you're curious, here are the watts needed by regular incandescent bulbs and compact fluorescent bulbs to produce the same amount of light.



Standard Bulb - CFL Bulb


40w = 10w

60w = 13w-15w

75w = 20w

100w = 26w-29w

150w = 38w-42w

250w-300w = 55w



Because the wattage of a CFL bulb is much lower than that of an incandescent, you can use higher wattage CFL giving you the equivalent light of a higher wattage incandescent. For example: If your fixture says not to exceed 60 watts, you can use a 15 watt CFL to get the same amount of light as an incandescent bulb or use up to a 42 watt CFL and increase the amount of light.

Link to comment
Share on other sites

60w is 60w.


If the maximum rating is 60w - then a 60w CFL would be tops, not a 15w (if you could buy one.. 30w is the most you'll find, I think)


One of the few advantages of the CFL, a dismal innovation in most respects - is that you can fit a brighter CFL bulb than an incandescent without exceeding the rated wattage.


I thought I'd understood this .... the wattage relates to amount of energy consumed but ....presumably heat generated is another important factor if one is fitting a bulb other than manufacturer specified ?


Do CFL's run cool ?


I'm slightly unnerved because I've just bought a lampshade from Asda for a ceiling pendant fitting and the attached advice is

bulb rating : Max 60w ( some other intials which I've torn off ,possibly G or C E ) or 14 Watt low energy bulb .

Are low energy bulbs hot ?


And guess watt - I thought I'd ordered a CFL ,but now I'm not sure . ( what is the matter with me ! ) It's a spiral tube affair but it's description is "energy saving ".It's 25watt . But I suppose it's going to be no good to use in the anglepoise ?


Any advice gratefully received ,especially if it factors in my blind spot/inability to understand this subject .

Link to comment
Share on other sites

Your hottest (ie brightest) CFL won't be any hotter than your coolest (ie least bright) incandescent. And seeing as you're unlikely to be replacing the latter with the former - in short - there's no need to worry about CFL heat.


A 25w CFL will be 'quite warm' to the touch - but you can still touch it - unlike most incandescents!


Your spiral will be fine for the anglepoise.. the spirals are just shaped that way to get more CFL into less space (as you would need to in order to get 25w). Unless it's a really small anglepoise head and a really long spiral, in which case it will look somewhat unsightly.



Whether or not you like the light it produces is a different matter.



(and.. no worries RD innit)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • Hmmm, millions of animals are killed each year to eat in this country.  10,000 animals (maybe many more) reared to be eaten by exotic pets, dissected by students, experimented on by cosmetic and medical companies.  Why is this any different? Unless you have a vegan lifestyle most of us aren't in a position to judge.  I've not eaten meat for years, try not to buy leather and other animal products as much as possible but don't read every label, and have to live with the fact that for every female chick bred to (unaturally) lay eggs for me to eat, there will be male that is likely top be slaughtered, ditto for the cow/milk machines - again unnatural. I wasn't aware that there was this sort of market, but there must be a demand for it and doubt if it is breaking any sort of law. Happy to be proved wrong on anything and everything.
    • I don't know how spoillable food can be used as evidence in whatever imaginary CSI scenario you are imagining.  And yes, three times. One purchase was me, others were my partner. We don't check in with each other before buying meat. Twice we wrote it off as incidental. But now at three times it seems like a trend.   So the shop will be hearing from me. Though they won't ever see me again that's for sure.  I'd be happy to field any other questions you may have Sue. Your opinion really matters to me. 
    • If you thought they were off, would it not have been a good idea to have kept them rather than throwing them away, as evidence for Environmental Health or whoever? Or indeed the shop? And do you mean this is the third time you have bought chicken from the same shop which has been off? Have you told the shop? Why did you buy it again if you have twice previously had chicken from there which was off? Have I misunderstood?
    • I found this post after we just had to throw away £14 of chicken thighs from Dugard in HH, and probably for the 3rd time. They were roasted thoroughly within an hour of purchase. But they came out of the oven smelling very woofy.  We couldn't take a single bite, they were clearly off. Pizza for dinner it is then. Very disappointing. 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...