Jump to content

28 Under floor heating plates Aluminium and LLoyd loom table


JB

Recommended Posts

Aluminium UFH double heat difuser /double spreader plates.

For wet UFH systems.

Cost is per plate

?3 per plate

?25 for 10

Buyer may collect or I can deliver as am in Tulse Hill SW2. Lightweight and can be carried.


Dimensions 1000mm x 390 mm

Each plate covers 1/2 m?

Fits UFH polypipe sizes 15 ? 17 mm in diameter (Length 20m available for ?5)

Double preformed groves for pipes at 200 mm centres.


Use to retro fit UFH in timber suspended floors. Fits easily between joists. Just staple to joist.

Very easy to install.


If you have renovation work with new floors - fit this it is very easy cosy and uses far less energy than conventional radiators.


Each water underfloor heating Aluminium double spreader plate will cover a heated floor area of 1/2 m? allowing sufficient spacing between each spreader plate,and also at the edge of the room where the pipe turns 180? back into the spreader plate.


The UFH double spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400 mm centres (easy to cut/adjust should the joist spaces vary).


Plate can be nailed, screwed or stapled onto the top of the floor joist or floor batten.




Judith 07837718040

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...