Jump to content

Cracks in ceiling - is it a structural engineer I need to look at them?


Recommended Posts

Got a crack in a bedroom ceiling which seems to have grown - I hadn't been in the room for a number of years as it's been rented out to a lodger.


Concerned it might be more than just a cosmetic thing and want to get an expert to look at it, but not sure what kind of expert that is - but was wondering if it might be a structural engineer. Any tips and recommendations of useful contacts gratefully received.

most (older) houses are in a constant state of movement around here.

Every 10yrs or so hairline cracks may need filling, rubbing down and overpainting if you're wanting a 'clean' finish.

Why not do this for now and see how it develops.

Is the crack straight (i.e. along the edge of a plasterboard panel nailed to the joists above) ?

I agree with KidKruger, but you don't have to go that far if you don't want to. An engineer will need to satisfy himself if it is stable or not - if not, in what direction it may be moving. You say the crack seems to have grown - but haven't got evidence. An engineer will only be of partial help to you but may find other clues: cracked brickwork, sloping window sills, door frame not true and so on.


If it were me, I'd make sure the ceiling wasn't loose (push it about a bit), then I would use filler in say 3 locations - middle and both ends. When dry, draw a pencil cross with a ruler at each point. Next to it write the date.


Forget about for a few months and take a look then - you and an engineer will know much more about what's going on.


How do I know ? I've been involved in building subsidence for over 30 years and still bought a place in one of London's most prone subsidence areas.

Thanks for the replies. It was a hairline crack when I bought the house but it's definitely grown to something that looks like it's more like a couple of millimeters wide, maybe a touch more, and my lodger has now admitted she noticed it growing.


She'll be moving out very soon (which is why I was in the room, getting a quote for some work on it) so I guess I can get on a ladder and investigate a bit closer then. I want to renovate the room but there's no point doing anything else until I know what's going on with the ceiling as if that needs to be fixed it should be done first.

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • Hi all My car was stolen between 1.30pm-1.50pm today in SE22 East Dulwich in South East London. I have of course reported this to the police but not much is being done, so I thought I'd give this a shot. The registration is GM66YOV, though its possible the licence plate may have been changed by now. If you see it anywhere please contact me or the police. Thankyou!
    • Years ago, got my ears pierced, alcohol on site, gun ..done.. Simple.. Gosh, surely your daughter of mothers can recommend  - do you really need to post on forum? Or maybe you home school whatever.. still recovering from shock, posted along the lines of, advice needed about adopting/ buying a dog…. Guess I am now at a age, where I should just keep quiet and pass no comment and read  postings like a “soap” - cheaper than tv licence…                    
    • Looking for a wrought iron bench with wooden slats in need of restoration - something like this.
    • I would'nt go locally I'd go to Maria Tash in Liberty..it'll be more expensive but they will do a good job and its their buisness not a 'sideline' to other beauty offerings. https://www.mariatash.com/store-locations/maria-tash-london-liberty?srsltid=AfmBOoqMz7Ev-4YqzrlkePX0n3i5JbiggGYSR9kU5z1p_ajP_jjQKqlt I have no experience of piercing at Polished but I went in to enquire about a manicure and I found the staff attitude pretty rude, looking me up and down when I walked in and just giving off a bad attitude like they just could'nt be bothered maybe because I'm not a glam 30 something? I dont know.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...