Jump to content

Local Electricians / 24 Hour Call Out


Recommended Posts

D.E.C Electrical provide full electrical services to both domestic and commercial properties across Greater London and the South East. Our 24 hour call out service is on hand for any emergency at any time.


D.E.C Electrical Service has always operated under strong values aimed at exceeding client needs. Our communication channels are always open?our relationship with our clients begins on the first day of contact, and only ends once they?re fully satisfied with our work.


When you hire our services, you can count on us for the results you want and need. Get in touch today, and discover the advantage of working with D.E.C Electrical Service.


D.E.C Electrical provides extensive maintenance contracts to a range of properties and commercial spaces. Our contracts are flexible and bespoke to individual clients to ensure that you are paying no more than necessary to maintain your space. Also includes 24/7 breakdowns.


What we do:


+ PAT testing

+ Fire alarms

+ Smoke alarms

+ Intruder alarms

+ Ventilation

+ CCTV installations

+ Consumer unit upgrade and replacement

+ Full scope inspection and testing

+ Conservatory electrics and wiring

+ General home installations

+ Data cabling

+ Partial rewiring

+ Kitchen rewiring

+ Full rewiring+ Patio heating

+ Garden lighting

+ Pool installations

+ Wireless controls

+ Electrical awnings


We look forward to hearing from you!


Dec Electrical

07448231645


Out of hours

07943670467

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...