Jump to content

Recommended Posts

In my area of Dul Vill we have been told by BT that there are about 500 lines affected by an unknown problem. The line gets restored, then it breaks again, and so on. Broadband also affected. The BT guys open all the cabinets in Half Moon Lane, Burbage Road, Dulwich Village etc., fiddle about for a couple of hours, open a conduit near Gail's Bakery - but nothing has been repaired permanently. And a couple of times they don't even replace the cabinet cover so it is open to any individual to mess about with it.

BT will pay compensation as long as you deduct weekends from the time your service is off. Big deal if it is Thursday! Every BT techie has a different story and none of them one knows what is happening here. This last 47 days I have had minimal service. Don't they realise that older people with help bracelets (not me) if they fall, the call needs a land line to get through to the registered helper. Or lines that go direct to burglar alarm companies, calls which are immediately passed to police. At this time of year many are on holiday and if they had this service and were burgled - forget it!

If the fault lies in the local network (between you and an exchange) then it is BT Openreach and not BT Retail that has an issue - BT Openreach is obliged to act at arms length to the rest of BT Group. If it is network supplying a third party (another thread suggested a problem with Skye Broadband) then your point of complaint needs to be with your service provider who liaises with BT Openreach and not with BT as a company. The fault (if it impacts 500 lines) may be with the exchange equipment (your 'retail' provider looks after that). Do remember that this is not like a fault with electricity or water or gas supply - every customer has unique equipment which connects (through interconnect points) their 'lines' directly to dedicated equipment in an exchange. It's not just like repairing a leaking water or gas pipe, where one repair can then give back supply to everyone 'on route'. If a multi-pair cable is cut (which can happen) every pair within that cable has to be reconnected to the correct other end. Although clearly having no service is very frustrating, it's often not that simple to identify and then correct a problem. Intermittent electrical faults (which seems like what you are describing) are a complete pain to locate and clear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...