Jump to content

Dulwich Christmas Market, 30th November, St. Barnabas Parish Hall, Free entry!


Recommended Posts

SoLo Craft Fair are returning to St. Barnabas Parish Hall for their Dulwich Christmas Market this November.


The beautiful village hall will be transformed into a winter wonderland with 60 independent traders selling high quality handmade gifts. SoLo Craft Fair have handpicked some of the best artists, designers and crafters from across the UK for this shopping event.


There will be refreshments on offer, and a kids corner to keep the little ones occupied with toys, books and crafts.


This is a great opportunity to support local businesses this Christmas. So make sure you pop down to St. Barnabas Parish Hall, Dulwich Village, SE21 7BT on Saturday 30th November 11-4pm.


For more info, please head to; www.solocraftfair.com

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...