Jump to content

Recommended Posts

A CD that I was playing the other evening has vanished somewhere inside the DVD player and I am not very sure how to get it out. I tried taking the screws out but they are sort of star or flower shaped ones and although I thought the screwdriver I had was for this type of screw I cannot budge them. Any ideas?
Link to comment
https://www.eastdulwichforum.co.uk/topic/24884-library-cd-stuck-in-dvd-player/
Share on other sites

Hi mrure.


Yes it is likely to be a Star Driver you will need. NOT a Philips


They are always very difficult to remove and easy to damage.


It is essential to have the exact size to avoid damaging the screw head..


' A CD that I was playing the other evening has vanished somewhere inside the DVD player '


Are you saying the draw opened but the CD was not there ?? How Odd..


Fox.

I have somewhere a driver with an assortment of bits including torx. Can you make a firmer identification from, say the RH panel at [en.wikipedia.org]?


I checked that link out earlier today and had difficulty identifying any of them mostly due to the screws in DVD being so small and also because I am in office so do not have DVD player to hand. Thanks for your help all of you. I will work it out.

rahrahrah Wrote:

-------------------------------------------------------

> Usually, DVD players have a small plastic clip, or similar on the bottom which allows you to release

> the drawer and get the disc out. Might want to check before taking the whole thing apart.


It's usually a tiny hole, ideally sized for a straightened paperclip. It takes a few attempts, but pushing it straight in about half a cm should release the drawer.

Loz Wrote:

-------------------------------------------------------

> rahrahrah Wrote:

> --------------------------------------------------

> -----

> > Usually, DVD players have a small plastic clip,

> or similar on the bottom which allows you to

> release

> > the drawer and get the disc out. Might want to

> check before taking the whole thing apart.

>

> It's usually a tiny hole, ideally sized for a

> straightened paperclip. It takes a few attempts,

> but pushing it straight in about half a cm should

> release the drawer.



Mrure has already explained. The Drawer is Open.

Somehow the disc has slipped off of the drive into the case..


Fox.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • That'll be a strobe gun, and yes, it is used for ignition timing. Not so useful with modern cars because timing is done via the ECU, but you could lock yourself in your darkened garage, put on some late 80s Detroit techno - such as Derrick May's 'Strings of Life - and use the strobe light to have yourself a little rave. The above websites are close to useless for checking the service history of older cars - there's no legal requirement to have your car serviced, let alone have it recorded somewhere.
    • Call National Grid and say you have a problem with a gas pipe  0800 111 999  and with luck they will fix it for free.  Most likely my diagnosis.   Some nutter had done their own gas plumbing in my house and National Grid blanked off both a supply to an old gas fire and a wrought iron pipe in the bathroom that supplied to the old bathroom water heater originally in the house. Extremely unlikely to be connected, may be from the days of gas lighting (mainly over by the 1920s) .  Gas connection will have long since been modernised.  If it hasn't been blanked off then just turn it on and sniff, or if you are like me light it.  This is how gas fitters did it in the past,  Although at your own risk (you are more likely to asphyxiate from natural gas, it is not poisonous, and the smell is an additive, so you can smell leaks. Chances are you are old enough to have used Bunsen burners at school. The end of the video is great, the biggest source of gas is your boiler, and if you house hasn't blown up already......  
    • Thanks, that's very helpful to have that confirmed! Really wasn't sure what we were dealing with. Will look into a gas engineer...
    • Ah, dozy me.  Thanks for pointing that out.   I was so impressed by the MOT details being there I  didn't  expect anything else could be so didn't check any further.  I've not owned anything with an internal combustion engine for decades.  Recently found a light tool that I've a dim memory of using for (??) timing checks.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...