Jump to content

Active Birth Workshop: 20th January 2013

ActiveBirthCharly
 Share

Recommended Posts

ActiveBirthCharly

ActiveBirthCharly

Posted
Posted

Hello all,


On another note and due to popular demand I have finally set a date for my January Active Birth Workshop! The date I am going with is the 20th January and I have two confirmed couples coming. I like to keep the classes fairly small so do PM me sooner rather than later if you are interested in coming.


The workshop costs ?35 per person and I would recommend that you bring your birth partner with you so that they understand the Active Birth principles and can support you with that in mind during the labour. The day runs from 10am to 5pm and we shall sit down and have a lovely home cooked organic lunch together as well as tea breaks throughout the day and cake in the afternoon. A couple from one of my previous workshops will come by to share their story and answer your questions. The workshop will be held at my home in Camberwell where there is plenty of free parking and public transport.


Please do PM me if you have any questions or would like to book.


Many thanks,


Charly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
  • Advertise Here

  • Latest Discussions

    • malumbu
      Victorian gas outlet??? Any advice?

      By malumbu · Posted

      If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Dogkennelhillbilly
      Councillor McAsh defects to the Greens

      By Dogkennelhillbilly · Posted

      Fair enough - I'm absolutely wrong on that one. 👍
    • Sue
      Car crashed into lamp post opposite coop , I hope no one was hurt ?

      By Sue · Posted

      I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • NewWave
      Dulwich Pool Discussion

      By NewWave · Posted

      confused by the question?

East Dulwich Forum

Established in 2006, we are an online community discussion forum for people who live, work in and visit SE22.

Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...