Jump to content

Recommended Posts

Ditto, yes, yes and yes. As with all wood I use minimum of three coats, primer, undercoat and gloss, and all old school oil based. Stairs get heavy traffic and will get damage. Typical repainting for the interior is every five years or so, but leave it until it needs redoing. And it is all in the preparation!

I used:

Heavy, then light hand-sanding of stairs.

Seal wood with acrylic floor covering (stops stains - tar etc. - ingrained in wood coming through, which it did after 1st attempt).

Two layers of undercoat in chosen colour.

Two layers of acrylic floor covering to get gloss finish.

All water-based, all quick-ish drying.

Four flights of stairs and hallway took a couple of weeks, first few days of which were hand-sanding.

alice Wrote:

-------------------------------------------------------

> Many thanks for all advice. Any suggestions for

> non gloss finish. Matt or satin.



The way I do it - I?d just use acrylic floor covering which is not glossy ie. Matt/semi-Matt.

I use Ruskins btw, sold at Plough.

alice Wrote:

-------------------------------------------------------

> Yes I?ve used that on sanded floorboards. So it

> goes on over the paint?


In this specific example, I?ve used it as detailed in my process list, above.


ETA: just realised my process list had a typo, fixed and should make sense now.

Good heavens KK, what a thorough job. I'd still go for oil based, maybe I imagine it gives a better finish and is more durable.


If you have old boards they are quite often finished with this black gunk which takes ages to get off with paint stripper, particularly now you can't get methylene chloride anymore. Also carpet tacks often left embedded. Although I don't mind a bit of distressing, and in any case you can't be too precious as you will get knocks on hard used areas like stairs.

I personally like the 'floating' effect of an exposed wooden handrail, always worth investigating what quality of handrail you've got, a lot of period properties used good quality wood e.g. oak, mahogany, for the handrail and cheaper wood for the spindles.

Again personally, I'd avoid a gloss finish, looks too institutional, matt finishes are far more forgiving of blemishes, eggshell is a good compromise.

I'd also be very wary if you intend to paint the treads too unless you intend to have a runner, as the last thing you want is a slippy finish...


9fHXhPBYckFns7sC953po6-768-80.jpg.webp

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • As I said, it was my understanding. I worded it very carefully. I didn't/don't know for sure, so clearly not a fact. And hardly an "opinion", which is something completely different. You have no idea what reason anybody might have had for not voting for him (unless you can point to some opinion poll results which actually asked people?)
    • Also, just to add, the threat to kill someone's dog and try to kick it, is an additional extremely unpleasant layer. I have noticed a lot of the burst water balloons lying around in the park too- that is not great for the environment either.
    • I’m basing it on the fact that Jeremy Corbyn had repeatedly and on record said he is against mandatory vaccinations in any situation, and he wouldn’t disclose wether he had the Covid vaccine himself    as I said. Not as bad as his brother but very definitely a bit weird about the whole thing. Just say you had the vaccination Jeremy, say that everyone should and stop being weird in the middle of a global pandemic    it’s the same slippery evasive nonsense about Brexit and him. About Putin poisonings and him.     if you are happy with his evasiveness then you do you.  But there is a reason the country wouldn’t get behind him 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...