Jump to content

Garden talk by Fergus Garrett, Monday 4 April, 7.30pm


Recommended Posts

Fergus Garrett: succession planting for a long garden season

The Dulwich Society?s Spring garden talk this year will be by Fergus Garrett, head gardener at Great Dixter and one of the UK?s most influential gardeners. In his illustrated talk, Fergus will use the magnificent Long Border at Great Dixter as an example of how to plan a long season border using structural plants, underplanting and interplanting with bulbs, use of self-sowers, pockets of bedding, masking with climbers and good maintenance. Fergus will explain how to choose the right plants that offer contrasting shapes, textures and foliage from different seasons to produce multi-layered long season communities.

The talk is at Bell House, 27 College Rd, Dulwich. Tickets ?7, surplus towards garden activities at Bell House.

https://www.bellhouse.co.uk/events/2022/4/4/succession-planting-for-a-long-season-with-fergus-garrett

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...