Jump to content

Half-day yoga retreat at Zen Yoga, Camberwell - Saturday 7 May, 2-5pm


Recommended Posts

Hi, I'm a yoga teacher based in Brockley and I am offering a half-day yoga retreat at Zen Yoga in Camberwell on Saturday 7 May.


This will be an afternoon immersion in movement, breath work and rest. An invitation to unwind, reconnect and replenish.


You can expect:


Slow, explorative yoga & embodied movement

Breath work

Guided meditation & reflection

Restorative yoga

Tea + sweet treat break


Suitable for all levels of experience. Everybody is welcome.


Taking place at the gorgeous Zen Yoga in Camberwell. It lives up to its name ? truly an oasis of calm with a hint of magic in the air.


Book a space here: https://bookwhen.com/sarahsavageyoga/e/ev-sjnh-20220507140000


Contact [email protected] with any questions


www.sarahsavageyoga.com

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...