Visit out new Tradespeople Directory! ×

clearys plumbing and heating

By bobi
May 22, 2013 in Request a Tradesperson

Recommended Posts

bobi

Posted May 22, 2013

- Share

Posted May 22, 2013

Hi I would like to give a great recommendation for clearys plumbing and heating they done an excellent job fitting my new bathroom suite. After seeing so many good comments for them on the ED forum we gave them a try and when the tiller we had arranged to come let us down they even went to the extent of doing the tiling themselves very grateful as otherwise we would have been without a bathroom until we could arrange another they went above and beyond to make sure it was done to the way we wanted.

Would gladly recommended them to anyone it was very nice to have someone in that took care of everything very modest and stress free service.

Clearys plumbing and heating 07977766655

Link to comment

https://www.eastdulwichforum.co.uk/topic/32522-clearys-plumbing-and-heating/

Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

Advertise Here
Latest Discussions
- Victorian gas outlet??? Any advice?
  
  By malumbu · Posted 37 minutes ago
  
  If you want to change a radiator and it is the same size, pretty straight forward. isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed. Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering. Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting. If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure. Pretty simple. I don't bother with jointing compound.
- Councillor McAsh defects to the Greens
  
  By Dogkennelhillbilly · Posted 1 hour ago
  
  Fair enough - I'm absolutely wrong on that one. 👍
- Car crashed into lamp post opposite coop , I hope no one was hurt ?
  
  By Sue · Posted 1 hour ago
  
  I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses?
- Dulwich Pool Discussion
  
  By NewWave · Posted 2 hours ago
  
  confused by the question?

Sign In