Jump to content

Recommended Posts

Like I said earlier I had this problem Constantly having to reset my router 10 times a day.


I changed my WAN Connection Type from PPPoA to PPPoE and the problem has ceased.


Might have to reset once or twice a week. But that is quite normal.


Just check your WAN Settings on your Router. They may of changed if you at sometime

did a hard reset on your router. Usually a button on the back of your device or sometimes

a small hole where you insert a paper clip / pin .


Foxy

Sue Wrote:

-------------------------------------------------------

> I'm almost at the point where I'm going to have to phone Plusnet. I'm out of contract since December

> and wonder whether they may be persuaded to send me a new router anyway .....


Being out of contract gives to better a negotiating position. If they refuse, threaten to change to another provider - I bet they'll send you round their first-born child with a new router gaffer taped to it. Especially as BT, Sky and V-media are campaigning hard for new business.


V-media sent us a notice just before Christmas saying they were raising our broadband price (which gives you the right to exit your contract). We rang them, said we were looking to take a certain deal with BT and they reduced our price there and then to less than we'd been originally paying with no new contract (though we still have 9 months on our old one).


(Seems using V-media's proper name is a no-no in the Lounge!)

Tried that in December, got a PAC (?) code after they only offered to reduce my monthly payment by 50p !!!


And I'm concerned at customer service if I go elsewhere, otherwise I would.


Fox, I'm sure it's my stupidity but I have no idea what you're talking about re WAN type. I've never done a hard reset on my router, and nothing has changed since the router was installed.


I don't want to do anything which might make things worse.


I'm going to try some other channels first.

Sue..


How on earth did you set your router up in the first place...


Http://192.168.2.1 will normally take you to your router...


Then you will need to enter Username / Password.


on a new router where you have not changed either


Username :- password


Password :- admin


You may need to refer to your Router Documentation.


Then just go to WAN Settings and check it is set to PPPoE

PPPoE (Point-to-Point Protocol over Ethernet)



PPPoA(Point-to-Point Protocol over ATM)

PPPoA is for Static IP addresses which you do not have.


Foxy

DulwichFox Wrote:

-------------------------------------------------------

> Sue..

>

> How on earth did you set your router up in the

> first place...

>




By following the comprehensive instructions provided with the router ....


And I changed channels by following the comprehensive instructions provided by Plusnet ....


I don't have time to do anything else about this today.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • Ahh, the old "it's only three days" chestnut.  I do hope you realise the big metal walls, stages, tents, toilets, lighting, sound equipment, refreshments, concessions etc don't just magically appear & disappear overnight? You know it all has to be transported in & erected, constructed? And that when stuff is constructed, like on a construction site, it's quite noisy & distracting? Banging, crashing, shouting, heavy plant moving around - beep beep beep reversing signals, engines revving - pneumatic tools? For 8 to 10 hours a day, every day? And that it tends to go on for two or three weeks before an event, and a week after when they take it all down again? I'm sure my boys' GCSE prep won't be affected by any of that, especially if we close the windows (before someone suggests that as a resolution). I'm sure it won't affect anyone at the Harris schools either, actually taking their exams with that background noise.
    • Thanks for the good discussion, this should be re-titled as a general thread about feeding the birds. @Penguin not really sure why you posted, most are aware that virtually all land in this country is managed, and has been for 100s of years, but there are many organisations, local and national government, that manage large areas of land that create appropriate habitats for British nature, including rewilding and reintroductions.  We can all do our bit even if this is not cutting your lawn, and certainly by not concreting over it.  (or plastic grass, urgh).   I have simply been stating that garden birds are semi domesticated, as perhaps the deer herds in Richmond Park, New Forest ponies, and even some foxes where we feed them.  Whoever it was who tried to get a cheap jibe in about Southwark and the Gala festival.  Why?  There is a whole thread on Gala for you to moan on.  Lots going on in Southwark https://www.southwark.gov.uk/culture-and-sport/parks-and-open-spaces/ecology-and-wildlife I've talked about green sqwaky things before, if it was legal I'd happily use an air riffle, and I don't eat meat.  And grey squirrels too where I am encourage to dispatch them. Once a small group of starlings also got into the garden I constructed my own cage using starling proof netting, it worked for a year although I had to make a gap for the great spotted woodpecker to get in.  The squirrels got at it in the summer but sqwaky things still haven't come back, starlings recently returned.  I have a large batch of rubbish suet pellets so will let them eat them before reordering and replacing the netting. Didn't find an appropriately sized cage, the gaps in the mesh have to be large enough for finches etc, and the commercial ones were £££ The issue with bird feeders isn't just dirty ones, and I try to keep mine clean, but that sick birds congregate in close proximity with healthy birds.  The cataclysmic obliteration of the greenfinch population was mainly due to dirty feeders and birds feeding close to each other.  
    • Another recommendation for Niko - fitted me in the next day, simple fix rather than trying to upsell and a nice guy as well. Will use again
    • Looks great! but could it be possible to pinch the frames a bit tighter with some long nose pliers and add more struts to stop the tree rats getting inside? Also, the only issue with a mesh base is that it could attract rats towards your property.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...