Jump to content

X 2 pushchairs


rosiegracex

Recommended Posts

I have a mountain buggy and joie single buggy for sale


The mountain buggy is slightly damaged

The mechanism to fold got damaged at my nursery

However you can still fold buggy

( I could obviously show you how to )

Looking for ?100

but want to get rid of ASA so open to offers


The joie buggy is in very good / almost new condition / used for 6months for nursery drop off and pick up

( you can fit two children in when seat is reclined / similar age and them almost cuddling one another / not an actual double buggy )

This comes with a rain cover

And a foot muff

I'm looking for ?70

If you Google joie pushchair

And look through the images it is similar to the black ones

The foot muff has stripes on the folded Over part


Pls PM me if interested


Thanks

Rosie

Link to comment
https://www.eastdulwichforum.co.uk/topic/84129-x-2-pushchairs/
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • Use to be a place in Clapham.. second hand
    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...