Jump to content

Pregnancy Fit classes Wednesday Evenings


Recommended Posts

Hello!


We are continuing our classes through December with a break over Christmas and have a few spaces left for our Wednesday evening class. Here are the full details:


Start date: Wednesday the 2nd December (no class on the 23rd or 30th of Dec)

Class time: 7pm - 8pm

Duration: 5 weeks

Cost: ?65

Where: Goose Green Clinic, 57 East Dulwich Road, SE22 9AP

To book: https://www.jellybellypt.com/services/pregnancy-fit/


Using a mixture of standing, seated and floor work, Pregnancy Fit aims to work the whole body using light resistance and props. This class will pay special attention to posture, core and breathing and allow you to become more in tune with your changing body. A lot of women are unsure of what they can and can?t do when it comes to exercise during pregnancy so this class aims to give women the confidence to keep active by doing exercise that will support the body and prepare you for birth and beyond.


Exercises are chosen specially for the pregnant woman and will prepare the body for the physical challenges of each trimester, promote good posture minimising back pain, maintain pelvic floor function, manage pelvic discomfort, maintain muscle strength and tone, release tightness and promote relaxation through breathing.


(You can join this class at any stage of pregnancy as long as you have clearance by your midwife or GP to exercise.)

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...