Jump to content

Maxi Cosi - Axiss Car Seat for Sale ?120


crentwistle

Recommended Posts

Maxi Cosi Axiss Carseat


Used but in really good condition and clean. We bought it new and it has not been in an accident. Has been a marvel for me and really saved my back no end!

Suitable from 9 months to age 4


?120


Feel free to contact cat 07888686279


The Maxi-Cosi Axiss car seat swivels 90? left or right to make lifting your child in and out of the car so much easier, with no twisting or stretching necessary, and it's also great if you're working in a small space. And there's no need to worry about locking the seat back into place as there is a colour indicator to confirm it has locked.


The Axiss car seat is suitable for children from 9-18kg and the height of the headrest and the harness can be adjusted at the same time from the front so that the Maxi-Cosi Axiss grows with your child. It's forward facing and fits into the car with a standard 3-point seat belt.

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...