Jump to content

Postnatal Reflexology Study - participants needed from Monday 4th April


Deepa

Recommended Posts

Hi everyone,


I am doing a study on the effects of reflexology on postpartum recovery.


I need 6 participants who have just given birth or are about to give birth. Ideally you will be in weeks 1 - 12 post giving birth. You will receive reflexology twice a week at your home over 4-5 weeks. Each treatment will last between around 40 mins and you will have to complete a questionnaire about your symptoms twice a week.


Treatments are offered at the subsidised rate of ?25 each.


Timings and deadlines are quite tight on this so please get back to me as soon as possible if you are willing to participate and commit for the full 4-5 week period. Treatments will start next week.


Also if you know someone who would like to participate please I would be most grateful if you could pass this on.


Thank you so much.


Deepa

07472557171

[email protected]

www.deepaliving.com

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • Use to be a place in Clapham.. second hand
    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...