Jump to content

Oddbins lordship lane


Moflo

Recommended Posts

I recently purchased Lanson Rose Champagne for my daughter's 40th. At the venue of her party they poured the champ. When I received my glass I immediately found it was bitter. On inspecting the cork you could see the bottle had been corked. A friend if mine said to make a complaint to the wine seller. I wish I had poured the wine back in the bottle but didn't think ontime and it was thrown. I have since called the shop concerned and they dismissed me! You can see and smell the cork to see the problem. I'm not happy with their attitude. Wouldn't mind if it was a cheap wine.
Link to comment
https://www.eastdulwichforum.co.uk/topic/182644-oddbins-lordship-lane/
Share on other sites

A long time ago I used to work at Oddbins (not East Dulwich branch)at the time we always did refunds if the bottle was brought back in with some wine in it, we never tasted the wine but took a good sniff to see if it was corked. Afraid coming back with just a cork and no bottle or contents I probably know where they are coming from as generally you can't really tell if a wine is corked by smelling the cork, plus head office only accepted valid refunds back to branch if you had the bottle


I don't know what state the cork was in but unless the cork was really looking bad (didn't expand after popping) or smelt rotten then maybe you could be a bit more hopeful, on balance though I think they are being reasonable and I don't know many wine shops that would accept a refund with just a cork

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • Use to be a place in Clapham.. second hand
    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...