Jump to content

Recommended electrician


in_nunhead

Recommended Posts

https://www.thecyclingsparks.co.uk/


He cycles to you with his tools on his back and specialises in domestic work, big and small (my job was small). Friendly, prompt, quick responder and adjusted the price down to reflect the work when he saw it (I'd be none the wiser). Nice chap, called Aaron, just started out in January after being fed up working for corporates on site.


Highly recommended by me :)

Link to comment
https://www.eastdulwichforum.co.uk/topic/184221-recommended-electrician/
Share on other sites

Hi all,


New to the forum - and only fully joined up to say this:


During the recent inclement weather we had an electrical fault that knocked out our boiler (in the middle of the night) the following morning we found a recommendation on here for a chap called Jasper Cardwell (JCElelectrics).We needed someone to fault find quickly.

He listened to my issue and managed to slot me into his schedule. He texted before arrival to give me an ETA.

He was efficient, pleasant and solved the problem. He charged exactly what he quoted, and I would highly recommend him.

His number is 07500 006 604.I was able to be back at work by 1300.


We will be using him going forward for any other electrical works.


Best

Veev

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...