Jump to content

Landmark lofts - anyone used them?


peachey

Recommended Posts

Yes we had it built up in Doncaster and it was craned in at end of Jan. If you don't need your ceilings dropped the whole onsite build process should last about 2-3 weeks. The planning, design, surveying and part wall side of things obviously takes a reasonable amount of time. They will employ a local partner to do the prep works and install once delivered and craned in, they have in the main been good but the more modular builds they do the better and faster they are getting. You can see pics and videos of the build on my instagram if you wish to see them @neil.harrod


Neil

Thanks so much for that Neil. Will take a look at your pics shortly!

How long did it take from beginning to end?


Did a bit of research yesterday about using them for a more traditional build (that's what we prefer I think.

If you do it that way we were put off by people saying your main contract isn't with Landmark Lofts but with the builders they appoint. Guess in that case you're at the mercy of if the building team is good enough, which seems pretty risky when you're talking about such huge sums of money?

I have no idea how they do traditional builds, I would suggest going to someone else for that probably so you know who you are dealing with.


For us the whole process took about about 6-7 months from first interest to completion. That included waiting for awaiting other quotes, design process, planning permission, awaiting for party wall surveys, price negotiations, build, dropping ceilings, crane lift, make good and snagging. Over all its a lot less painful than a traditional one especially if you are living at the property and have kids. For example we had no roof for just one night as opposed to weeks on a traditional build.

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...