Visit out new Tradespeople Directory! ×

Central London Lofts Recommendation

By ISLA_C
March 14, 2018 in Request a Tradesperson

Recommended Posts

ISLA_C

Posted March 14, 2018

- Share

Posted March 14, 2018

I recently underwent a loft conversion with Central London Lofts and wanted to recommend them because I've ended up with a beautiful big bedroom and extra bathroom. The project took longer than I expected and went a bit over budget, but it seems this is pretty standard for building work! Ali was our project manager and at every turn he did his utmost to get things just right, and promptly fix any problems that came up. Thought this might be useful for others.

Link to comment

https://www.eastdulwichforum.co.uk/topic/185538-central-london-lofts-recommendation/

Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

Advertise Here
Latest Discussions
- Victorian gas outlet??? Any advice?
  
  By malumbu · Posted 2 hours ago
  
  If you want to change a radiator and it is the same size, pretty straight forward. isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed. Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering. Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting. If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure. Pretty simple. I don't bother with jointing compound.
- Councillor McAsh defects to the Greens
  
  By Dogkennelhillbilly · Posted 2 hours ago
  
  Fair enough - I'm absolutely wrong on that one. 👍
- Car crashed into lamp post opposite coop , I hope no one was hurt ?
  
  By Sue · Posted 2 hours ago
  
  I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses?
- Dulwich Pool Discussion
  
  By NewWave · Posted 4 hours ago
  
  confused by the question?

Sign In