Jump to content

Recommended Posts

My son and I walked past an old building today on the way to Brockwell park. We looked over the front briefly however couldn't come to any conclusion about its past. Any old school residents available to shed some light. Ive attached a photo. I think it could of been a market? or perhaps a garage. Any info or photos would be very interesting. Were not in the property development game or anything. just very curious :)
Link to comment
https://www.eastdulwichforum.co.uk/topic/197999-interesting-old-building/
Share on other sites

two extracts from urban75 thread



"Full marks to those who identified this Edwardian building as a dairy. It was designated a Locally Listed Building by Lambeth Council in 2012 - the listing description reads: 279 Rosendale Road SE24 9EJ - Arts and Crafts style former milk depot with attractive brick frontage building. 1906. banded fa?ade with buillseye windows. it is protected by the Peabody Estate Conservation Area designated in 1999."


"Ok Buckle up.

What you see are the remains of what was an Express milk depot. I lived on the estate next door from 1957 till around 25 years ago. We would hang out outside the dairy waiting for the electric milk floats to exit then help the milkman put the milk on residents doorsteps for a couple of bob. There was an express shop to the left and a milk machine where we could score chocolate milk.."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...