Jump to content

Damp proofing - Recommendation - Dave Reilly (Plastercare)


Recommended Posts

Yet another endorsement for Dave Reilly. He did a thoroughly professional job getting to the root of our plaster problem, pointed out the issue that a previous ?professional? had missed, fixed it, plastered absolutely superbly, tidied up and invoiced for bang-on the price quoted. His work is extraordinary. Now that I?ve painted the wall, I literally cannot see the join between the old plaster and the new section he fixed. Amazing work. 100%.
  • 3 weeks later...
  • 1 year later...
  • 1 month later...
  • 6 months later...

I'd like to add a recommendation for Dave to this thread. Dave came to look/quote at very short notice when we were worried that we had a damp issue we'd need to fix before a new kitchen was installed. He was honest and straightforward - telling us that there actually wasn't a damp issue, how to sort out the mould we could see easily ourselves, and avoiding us unnecessary expense. Much appreciated. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...