Jump to content

Need a metal gate altered - welding job


Carrie

Recommended Posts

After we had the front path tiled our front garden gate is now slightly too big and won?t open fully as it catches on the tiles. We?ve got round this by drilling a couple of extra holes and raising the gate a couple of inches on the hinges - but that means the gate can?t latch shut.


It?s been like that for many years but following the theft of plants from my front garden I?d quite like to be able to shut the gate properly -as if may deter a ?spur of the moment? plant thief if they have to open the gate!


Is it even possible to cut a couple of inches off a metal gate and then re-weld the bottom bar back on? If so, can anyone recommend someone who could do this?

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • Is Gigi spayed & microchipped?
    • was the price not displayed on the menu?
    • Perhaps Gooseygreeny was not familiar with the wildlife before Gala was imposed on the park, since when its value to wildlife has deteriorated. The Park had never been disturbed before, as the council had respected it as a Site of Importance for Nature Conservation, so only the Common was licensed by them as a site for events. The first time Gala held their event, there was a tree with woodpeckers nesting in it right in the middle of the main field they used and thrushes, blackbirds and great tits nesting within the shrubs and trees immediately surrounding the field. The woodpeckers were thriving on ants from the anthills in the grass. To those of us who used to enjoy watching the wildlife, it was very obviously a Site of Importance for a variety of birds. Despite being accessed by the public and their dogs, it had been relatively undisturbed,  which was one of the main reasons why it was so special and why I have been opposed to the Gala festival being held during the bird nesting season.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...