Jump to content

Plumber to fix broken Beko Washer Dryer?


Recommended Posts

Hello


I have a broken Beko Washer/Dryer (integrated). I've gone round the houses with companies (Beko/Curry's) saying they can't fix as they can't source a part.


Can anyone recommend a plumber? Someone came out to assess and made the issue worse - it was previously just not turning on but now it's filled with water.


The part is apparently a Main PCB module if anyone can recommend suppliers.


Sorry to post on here it's just without the big companies helping I'm at a loss with what to do and scared the house will flood sad smiley

Hi,

You can easily drain the water out from the filter at the bottom. You definitely do not need a plumber for an appliance you need a appliance engineer.

If Beko cannot source the part for you nobody will be able to unfortunately. All parts suppliers parts will come from the manufacturer to start with.

I wouldn?t use espares for any parts. They are massively over priced and send out pattern parts for the price of original parts.

I can talk you through draining the water away if you like.

07921777428

Steve (Spin Doctor)

Thanks so much, I really appreciate it. Steve I've left you a message on your mobile.


The company I called (listed on the machine) were a bunch of charlatans if I'm honest. They signed me up to a ?15 per month plan, sent someone round, he said he'd be in touch to fix it. By chance I called said company earlier today to let them know that the situation had worsened and that water was sitting in the machine and they said "oh, we cancelled your policy because it was too expensive to fix" - but no one told me! I then called the sub contracted folk and asked what the problem was and they said the part was going to take "too long" to arrive - but didn't say how long. Seems odd they'd decide it was too long when I'm the customer and still don't know how long that is?


Any and all advice very much welcome. I've drained it with a bucket and some cloths and I *think* I've turned off the water supply.


Seems very wasteful to replace the machine when it's only 18 months old and could simply use a new part?

> Any and all advice very much welcome.


1) Speak with 'Spin Doctor' Steve. He's the expert.

2) The remedies I'd be thinking of are (a) (assuming it is a control board that's the problem) replacing it, either new or maybe even a salvaged one as may be found on Ebay or elsewhere; (b) (assuming you bought it new from a business) asserting your right to repair or replacement by the seller, of an item that has turned out to be not of merchantable quality, or whatever the current term is. But you're going to need an expert to help with either of these or any other suggestion.

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • The current wave of xenophobia is due to powerful/influential people stirring up hatred.  It;'s what happened in the past, think 1930s Germany.  It seems to be even easier now as so many get their information from social media, whether it is right or wrong.  The media seeking so called balance will bring some nutter on, they don't then bring a nutter on to counteract that. They now seem to turn to Reform at the first opportunity. So your life is 'shite', let;s blame someone else.  Whilst sounding a bit like a Tory, taking some ownership/personal responsibility would be a start.  There are some situations where that may be more challenging, in deindustrialised 'left behind' wasteland we can't all get on our bikes and find work.  But I loathe how it is now popular to blame those of us from relatively modest backgrounds, like me, who did see education and knowledge as a way to self improve. Now we are seen by some as smug liberals......  
    • Kwik Fit buggered up an A/C leak diagnosis for me (saying there wasn't one, when there was) and sold a regas. The vehicle had to be taken to an A/C specialist for condensor replacement and a further regas. Not impressed.
    • Yes, these are all good points. I agree with you, that division has led us down dangerous paths in the past. And I deplore any kind of racism (as I think you probably know).  But I feel that a lot of the current wave of xenophobia we're witnessing is actually more about a general malaise and discontent. I know non-white people around here who are surprisingly vocal about immigrants - legal or otherwise. I think this feeling transcends skin colour for a lot of people and isn't as simple as, say, the Jew hatred of the 1930s or the Irish and Black racism that we saw laterally. I think people feel ignored and looked down upon.  What you don't realise, Sephiroth, is that I actually agree with a lot of what you're saying. I just think that looking down on people because of their voting history and opinions is self-defeating. And that's where Labour's getting it wrong and Reform is reaping the rewards.   
    • @Sephiroth you made some interesting points on the economy, on the Lammy thread. Thought it worth broadening the discussion. Reeves (irrespective of her financial competence) clearly was too downbeat on things when Labour came into power. But could there have been more honesty on the liklihood of taxes going up (which they have done, and will do in any case due to the freezing of personal allowances).  It may have been a silly commitment not to do this, but were you damned if you do and damned if you don't?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...