Jump to content

Recommended Posts

Thames Water have written again stating the works are being delayed and will now commence on Monday 26th April for (12) twelve weeks.




Thames Water begin water mains renewal works on Forest Hill Road for (12) twelve weeks, starting 12th April, this coming Monday.


The Transport for London website states;


"FOREST HILL ROAD, SE23: Due to roadworks, from 19:00 on 9 April to 19:00 on 7 May, Route 63 buses will be starting and terminating at Peckham Rye."


Am assuming that the 363 will divert Lordship Lane, Barry Road, Peckham Rye both ways as was previously the case when TW repaired the burst on Forest Hill Road earlier in the year and subsequently when they worked on Woodvale.


Currently no disruptions reported on the TfL website for the 363, so it may be running??


Effectively from Forest Hill Road, those that rely on public transport are isolated. No prior warning or consultation with local residents who will be affected by these works by TW. I would further suggest traffic will become significantly worse with motorists seeking alternative routes to avoid Forest Hill Road. It will be of great inconvenience for those wanting to get to Peckham or further North, or for any appointments at Kings College Hospital, particularly as we are still within the pandemic.


The named contact on the letter for any questions is [email protected]

Thanks for this. This is a continuation of the water main replacement works along Underhill, Melford and Wood Vale that have been going on for the last 6 months. Hadn?t realised they were going down FHR. To be fair, the Thames Water team have been pretty good at keeping traffic and pavements as free flowing as possible and were really good about keeping residents informed about water outages and traffic closures so hopefully that continues. But appreciate the heads up re the 63.


Marginally less impressed that the last phase of Thames Water works managed to crack our local gas pipe/main on Underhill/Melford so that now needs to be replaced (another 6-8 weeks of roadworks) but hopefully that lesson has been learned!

The letter states;


"our work on Forest Hill Road will start at the junction of Woodvale. We will then be working on Forest Hill Road in 100 meter sections to the junction of Mundania Road.


To complete our works, we'll have lane closures in place on Forest Hill Road supported by 2 way traffic lights.


A 3 way traffic light system will be in place on Forest Hill Road when our works are at the junctions of Marmora Road, Therapia Road and Mundania Road."



+Ve - The TfL website still shows NO diversion for the 363, (thankfully) and still running along Forest Hill Road.

It'll be chaotic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...