Jump to content

Taxi or minicab service to central London from East Dulwich


Recommended Posts

Hi

We have 5 visitors staying here at the end of July/beginning of August. I wondered if anyone could recommend a minicab service that could ferry them into town (and back sometimes??) from East Dulwich for usual tourist trips and approximately how much that would cost? By the time our visitors pay for Oysters and sit for ages on a bus, I thought it might be worth paying a little extra sometimes for the convenience. We are between East Dulwich/Forest Hill/and Honor Oak Park Stations so it is tricky to get into town easily. They want to save their energy for sightseeing not commuting!


Any help/recommendations greatly appreciated.


Thanks

Jane

The Keen Group def ! Never late and drivers know where they are going 02082994000 , also around 20 pounds . Also won't be a problem being picked up from the city with them , whereas it will be if you use a small local firm as I find their drivers only like local journeys ! X
  • 4 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • @malumbu as your questions would take us off topic on so many tangents, I will defer my response to a more appropriate thread.
    • @vladi it would be good to hear your views on my comments (a) the damage to society of austerity and (b) how poorly the Tories handled our economy prior (and post if you like) Covid Do you believe in climate change and if so what should we be doing?  I'd disgusted by Badenock aping Reform.  
    • The Labour Party is a poor advert for the Labour Party. I think this council just reflects the national picture. 
    • Covid certainly was a big factor in creating the debt burden however the Govt continues to expand the hole by giving crazy subsidies to suppliers of so-called "low carbon" electricity eg wind turbine farms, solar panels and worst of all - Drax power station. According to the Renewable Energy Foundation, the UK currently spends around £25.8 billion per year on renewable electricity subsidies, covering both direct and indirect schemes. Drax gets just shy of £1 billion a year to use import & burn wood pellets which are produced in a highly energy consumptive process.  Wood pellets used by Drax  are produced through a multi-stage process that converts wood material into dense, energy-rich fuel. The raw material typically comes from, offcuts, and sawmill by-products rather than high-value timber. Logs are first collected from forests across the U.S. South and West Coast, ‘ At pellet plants, the wood is debarked and chipped into small pieces before being dried to reduce moisture content. The drying process often uses waste wood as a heat source to improve efficiency and lower emissions. Once dried, the wood chips are milled into a fine powder, then compressed at high pressure through a die to form small cylindrical pellets, each around 6–8 mm in diameter. The natural lignin in the wood binds the pellets together, eliminating the need for chemical additives. After production, pellets are cooled, screened to remove dust and fines, and stored in large silos. They are then loaded into trucks or railcars and transported across the United States from west to east to dedicated export terminals.. At these terminals, pellets are conveyed into covered storage domes or silos to protect them from moisture, since wet pellets can disintegrate and pose safety risks. From there, bulk carriers transport the pellets across the Atlantic to the United Kingdom. Drax even had to develop specialized port and rail infrastructure to handle pellet imports , including large storage domes at  Immingham and direct rail links to its  power station. It's no wonder wed have the highest energy costs in all of Europe!
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...