Jump to content

Recommended Posts

Does anyone know how to identify which fence (i.e. left/right) belongs to a property? Southwark council own the neighbouring property and the tenants have taken it upon themselves to remove the ivy that was holding the old fence together. I am just trying to work out who's responsibility it is - any advice greatly appreciated.
Link to comment
https://www.eastdulwichforum.co.uk/topic/66608-neighbours-fence/
Share on other sites

My deeds don't say anything about this either.


I've always just split any cost with the relevant neighbours.


In one case where they wanted to replace an old wall with a fence rather than repairing the wall, I paid the extra cost of repairing the wall (ie the neighbours paid half of what the fence would have cost, and I paid the rest).

minder Wrote:

-------------------------------------------------------

> L1, you say that the people living next door to

> you have removed some ivy from their fence i.e

> taken it upon themselves.

>

> So why didn't you?



If the ivy was holding the fence together, as the OP says, then I guess removing it has caused the fence to fall down?

Thanks all. I should have been clearer in the original post, next door have removed the ivy and now the fence is falling down. They have no intention of replacing the fence. On closer inspection the front(neat side) of the fence faces their garden which suggests it belongs to that property.


I am really trying to establish if the fence is southwark's responsibility and how likely they are to replace it. I will probably just end up paying for the replacement but feels as though the neighbours have forced me into it.

Did you get a copy of the Title register as well as the plan ? Sometimes this has reference to boundaries and maintenance .


Have you tried getting a copy of register and plan for your neighbour ,this might show their responsibilties for boundary maintenance ?


Tricky all this I know .Wish you luck .

*Bob* Wrote:

-------------------------------------------------------


> The old myth; cause of many a dispute


Agree, our house is a case in point. We are responsible for all the boundaries as our house is build on one half of a split of a single property, and the neighbour decided they wanted as little responsibility for boundaries as possible (which is fair enough!)

L16579 Wrote:

------------------------------------------------------- They have no

> intention of replacing the fence. On closer

> inspection the front(neat side) of the fence faces

> their garden which suggests it belongs to that

> property.

No, it suggests the opposite. When someone constructs a fence, they work from their own garden. So, the fenceposts are in the garden of the fence owner and the neat side faces the neighbour.

kiera Wrote:

-------------------------------------------------------

> No, it suggests the opposite. When someone

> constructs a fence, they work from their own

> garden. So, the fenceposts are in the garden of

> the fence owner and the neat side faces the

> neighbour.


Depends what sort of fence it is though, doesn't it?

I've always understood it was accepted practice to put the good side to your neighbour, and I'm pretty sure it is a requirement if your neighbour is the public highway.


If you have the sort of fence where the panels are on one side of the post, then by putting the good side towards your neighbour you get a couple of inches of extra garden

It's basically individual, depending on previous history.

On my left the guy built a brick wall and left the 'rough' side for me

On my right the neighbour put up a chain-link fence (his side of the posts), which I several years later re-covered with fence panels (my side of the posts, good side for me).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...