Jump to content

Flooring


Pkara

Recommended Posts

  • 2 months later...

I would like to add a further recommendation toward Derek and the Finishing Point team.

On time, on budget, flexible on timings, to a high level of skill and care they installed 60sq.m of new engineered parquet flooring which is by no means easy. In short, they did a great job and were a pleasure to have undertake the install for us. happy to send photos via PM. cheers

Link to comment
https://www.eastdulwichforum.co.uk/topic/99737-flooring/#findComment-1013159
Share on other sites

  • 4 months later...
Another recommendation for Derek and Roy from Finishing Point. They were very helpful throughout, helped me move furniture at one point, helped work out what order to do things in. Roy was a pleasure to work with. All on time, on budget, in spite of having to replace one floorboard twice due to the colour not matching.
Link to comment
https://www.eastdulwichforum.co.uk/topic/99737-flooring/#findComment-1075297
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • https://www.screwfix.com/p/flomasta-y-piece-connector-3-4-/636fa  
    • You have to use the right extinguisher for the type of fire - water/foam not to be used for live electrical fires for example. A quick Google says powder extinguishers can be used on the most different types of fire. In a public/commercial setting fire extinguishers have to be serviced every year. Not sure the recommendation for residential ones, but when you buy extinguishers and fire blankets check if there's an expiry date.   
    • Thanks, yes I need the y piece for the water to go to IN both washing machine AND the dishwasher but the y piece doesn’t fit on the B yellow pipe…  I’m not worried about the waste pipe for now, I’m just concerned about the supply to get water in to both appliances 
    • Not sure about the word “input” - do you mean outflow / waste ? Red figure A looks like the sink overflow. If B is the washing machine outflow then that’s where you want your Y fitting. ( assuming all above conjecture is correct). I’d put a cap on that chrome threaded dead connection too. Don’t just rely on the valve. It all looks a bit of a mess TBH 🫣.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...