Jump to content

Where to shred confidential waste?


BunnyBurrow

Recommended Posts

Does anyone know if there are any public facilities anywhere for shredding confidential waste? Bank statements etc...?


I asked at the Veolia recycling place on Old Kent Road, but they just pack it all together without shredding so I don't fancy leaving it there.


I have rather a lot to shred so don't want to do it manually ideally!


Thanks!

BunnyBurrow, also, if it's stuff like bank statements, you could just cut the identifying parts off (name, address, bank, account number etc, sort code etc) and either shred or mush up those bits, then roughly tear up the parts without identifiers on and mingle those roughly torn up parts amongst the rest of your recycling?


Maybe too much trouble though if there's a lot of it.


ETA: But if it's bank statements from the same bank, you can cut the tops off several of them together, because the identifying parts are always in the same place - at least they are on mine.

singalto Wrote:

-------------------------------------------------------

> I bought a shredder which didn?t cost much and

> then put the shredded paper in my composting bin

> in the garden.



I have a shredder, but I find if you've got a lot to do it takes forever, gets clogged up, and keeps cutting out.


:(

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...