Jump to content

Recommended Posts

Seems to be a bit of a spot for things like this... The car park for Belvoir lodge just of Underhill for instance. A year ago the the trees and a patch of unused overgrown land was trimmed and cut there, and a few stolen motorbikes were found chained to the trees, hidden by the undergrowth... also, because of its seclusion people are going around there using the gas canisters you get for soda syphons etc to obtain a quick high, the place is littered with them. So I imagine much worse goes on there at night.
Is that the gated little road - sparks67? We?ve seen a few canisters thrown in our garden - I hadn?t known what they were? I imagine it was cleared up for knotweed treatment, or around the same time. We never go out there, but recently had to access and it was very overgrown again.
I believe the small canisters are used to hold nitrous oxide (also known as laughing gas) for their high rather than carbon dioxide which is used to carbonate water into soda water in a soda syphon. I don't think they would get much of a high from that.

That?s right bargee it?s NO2 laughing gas.

It?s been a thing for decades, bit of an increase in popularity last few years though.

Back in the day in my town, weekends was big queues at Timothy Whites where kids were all buying canisters because ?mum is making whipped cream? (or something like that).

N2O : Nitrous oxide, laughing gas. Among its uses are as an aerosol propellant for eg whipped creams https://en.wikipedia.org/wiki/Nitrous_oxide#Aerosol_propellant


NO2 : Nitrogen dioxide. A rather unfriendly gas and environmental pollutant, classed in the USA as extremely hazardous. https://en.wikipedia.org/wiki/Nitrogen_dioxide#Toxicity


While using the Wikipedia lookups (often more reliable than the EDF), please do consider occasionally contributing a little to its ongoing costs. https://donate.wikimedia.org/

DulwichFox Wrote:

-------------------------------------------------------

> The Cartridiges used in Soda Syphons a Whipped

> Cream makers containe C02 Carbon Dioxide, NOT N20

> Nitrous Oxide.


The cartridges in soda syphons are CO2, the cartridges in whipping syphons for whipped cream are N2O. CO2 is good for carbonating water (hence the name) but if used on cream it will give it an acid taste.

rendelharris Wrote:

CO2 is good for carbonating water (hence

> the name)


Surely Carbon dioxide is called that because it has one carbon atom and two oxygen atoms in the molecule?


Nothing to do with carbonating water?


Have I misunderstood? Did you mean a different name?

Sue Wrote:

-------------------------------------------------------

> rendelharris Wrote:

> CO2 is good for carbonating water (hence

> > the name)

>

> Surely Carbon dioxide is called that because it

> has one carbon atom and two oxygen atoms in the

> molecule?

>

> Nothing to do with carbonating water?

>

> Have I misunderstood? Did you mean a different

> name?


No - as above, if you force carbon dioxide gas into water under pressure it dissolves, creating carbonic acid, and making carbonated water.


ETA I mean hence the name of carbonated water, not hence the name of carbon dioxide!

Only a very small amount of carbonic acid is produced when water is carbonated. Most of the carbon dioxide remains in solution rather than reacting with the water. When the CO2 leaves solution it returns to its gaseous state in the form of thousands of tiny little bubbles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • You'd need to get a proper quote (or three) for instance removing a cast iron bath is a very different job from removing an acrylic one. Again what pipe work will be being joined into - matching old imperial pipes with modern metric ones is different from like to like, as is dealing with a copper or an iron distribution system. The amount (area) of retiling required is an issue, as will be the state of the wall behind the tiles. It may of course all be very plain sailing, or not. Have a first look at plumber recommendations on the relevant pages on this site. If it's all easy then 3 days work may be sufficient. But it could be a week if there are snags. 
    • Hi. Can anyone suggest a plumber for the job below? Replace bath tub with a shower enclosure, putting pipes to showerhead behind wall, re-titling damaged/removed tiles Also any idea of the costs involved for the labour as we will buy the items required?
    • Aria came round to fix my tub drain when I'd messed up the seal. Came within hours, fixed the tub, and ran a bath to make sure it was okay. Here's where the fun starts. While he was over, I asked him questions about the rest of the plumbing round the house. I had just moved into a Victorian home that was previously being rented. Unsurprisingly, we found another leak in the tub and a drip in the kitchen tap.  He came back the next day to put a better pipe in my bathtub and replace the kitchen sink. Painstakingly figured out how to replace the hard-to-access kitchen sink without cutting through the wood panel with the help of his builder friend, Mark. Answered all my questions and clearly knew his stuff. All this right before Christmas holidays! 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...