Jump to content

Recommended Posts

I'm all for saving the planet but why can't they invent LED lightbulbs that don't look $hit? Even the so called warm white bulbs look nothing short of ghoulish. Plus they no longer work with your analogue dimmers so they end up needing changed too. Anyone found a decent solution yet?
Link to comment
https://www.eastdulwichforum.co.uk/topic/236923-led-lightbulbs-suck/
Share on other sites

Renata Hamvas Wrote:

-------------------------------------------------------

> There are some energy saving bulbs that can be

> used with dimmers they are usually a bit more

> expensive than the normal ones, it normally says

> if they are suitable for dimming on the packaging.

>

> Renata


I think Mr D's point is that newer dimmable lEDs are not compatible with the older dimmer switches, so they have to be changed to work with the newer LEDs...

You can replace the dimming modules but keep the same faceplates and switches/knobs to cut down on cost. Buy a decent quality module. Varilight V-Pro modules are good (and quiet) with LEDs (haven?t found any incompatibilities yet). Probably about ?10 each or so online.


Civilight GU10?s are the best light-quality-vs-price I?ve found, not much to criticise about them. Nice light at full blast and they have a dim-to-warm feature that is also pleasing. ?13 each for the 7w ones. 9w also available if you need mad-bright.

https://well-lit.co.uk/store/led-spotlights-gu10/


We also have some Soraa LED GU10?s which do things that old halogens can?t, but they?re only really for specific technical applications (and will be too pointlessly expensive for most unless you need the features).


For the rest of them, you?re going to have to experiment a little to find what you like. Unless you?re desperate to save a few quid on a bulb, stick to the handful of very well-known brands and forget the rest for these.


LED filament bulbs will be the closest attempt at incandescents. The newest varieties (this is the problem with a lot of LED bulbs - the backlog of older tech clogging up the internet) will also offer a dim-to-warm feature - to replicate dimming of an incandescent yet further. You can usually recognise DTWs because they show a colour temperature range (eg 2200k-2700k) instead of a fixed temperature (eg just 2700k) in the technical blurb or say ?dim to warm? (or just ?DT? in the case of Philips) in the product description. Filaments used to be lower power, 'for decorative purposes only' as they say - but their power has increased and it?s possible to get LED filament 100w equivalents also with DTW these days.


The places I would avoid filaments are where the bulb is also shaded by a warm coloured shade anyway, or where the light is illuminating a warm coloured wall. In these cases, the combination of filament yellow plus the extra colour of the shade or wall may end-up making the whole effect too sepia-warm (even for you!). in these cases a decent non-filament (but still warm 2700k temperature) LED bulb might work better.


The better of the specialist bulb retailers will let you buy a load of bulbs and try them out with a no-quibble return policy. Buy a boxful of different types, wattages, brands - and experiment a little to see what you like without actually being stuck with anything.


The future has definitely arrived, but it does involve some legwork.

Philips. Don't go for cheap bulbs, I replaced all the ceiling bulbs in our place with warm 100w equivalents, and other lamps with 50w or so...about ?15 a bulb two years ago, but well worth spending extra.


The light is not dissimilar to the old filament bulbs, and my electricity bill as gone down enough to have recovered the cost over two, maybe three years.


There're all warm, i don't understand this cold for kitchens and bathrooms, as you say you end up looking like a corpse in the mirror. You can't mimic daylight.

Agreed, Philips are a solid brand. They also print all the information relevant to the product on the bulb itself, which is handy when you're trying bulbs out and you've mixed up all the boxes.


Do seek out LED filaments bulbs with DTW tech though. Regular dimmable filaments without this feature don't quite look right when dimmed.


And check the lumen output (how much light it puts out) alongside the wattage of the bulb as well. Improved tech means they can get more lumens out of the same wattage. In Philips' (Philips's?!) case you can buy two 8w DTW filament bulbs, one puts out 400 lumens and the other 800.


And finally, if you're particularly anal about it (which clearly I am) - when you've decided on the bulb, write the date you installed it on the bulb itself. A 5 year warranty is no good if it fails but you can't remember when you started using it. The manufacturers DO honour their warranties to those who can be bothered: I've returned some failed bulbs after 3 or 4 years and received replacements, no questions asked.

Odd thread. I changed all the bulbs in the house with LED ones from Scfewfix a two years ago. Light much better than those dreadful CFL ones - now there was a mistake from the EU (although I wouldn't leave because of that). The LED bulbs were not one of the big brands.


If you've used in incandescent bulb in recent times you'll realise why they were banned. You can cook toast bread on them and you can smell the stink as they burn through the light fitting. Someone before the referendum complained about not being able to use coloured incandescent bulbs any more. Surprise surprise you can get coloured LED ones. I'm sure that someone will still complain about the quality of the colour given out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • Second time Aria has completed a plumbing job for me and both times he’s been polite. Communicative, kept to time and completed the job. He’s very helpful and tidy as well. First job was ball valve in water tank, not easy at all. He and his team were fantastic. This time kitchen tap cylinders replaced and tap tightened.  Much appreciated, Aria thank you.
    • Thought others may be interested to help a local community centre help others.    My bank account offers roundup and it’s been growing all year. As well as treating myself or putting it towards a train ticket to see my family I’ve made a donation to the Albrighton. They can use donations at any time but I hope my donation will go towards the Christmas hampers.    Can you support them so they can provide Christmas hampers?   https://www.justgiving.com/crowdfunding/albrightoncommunityfridge?utm_id=1&utm_term=M22JKQb6W   A donation of £50 will pay for a hamper to feed a family over this Christmas period. A donation of £30 will pay for a hamper to feed someone living on their own over the Christmas period.
    • I've never got Christmas pudding. The only times I've managed to make it vaguely acceptable to people is thus: Buy a really tiny one when it's remaindered in Tesco's. They confound carbon dating, so the yellow labelled stuff at 75% off on Boxing Day will keep you going for years. Chop it up and soak it in Stones Ginger Wine and left over Scotch. Mix it in with a decent vanilla ice cream. It's like a festive Rum 'n' Raisin. Or: Stick a couple in a demijohn of Aldi vodka and serve it to guests, accompanied by 'The Party's Over' by Johnny Mathis when people simply won't leave your flat.
    • Not miserable at all! I feel the same and also want to complain to the council but not sure who or where best to aim it at? I have flagged it with our local MP and one Southwark councillor previously but only verbally when discussing other things and didn’t get anywhere other than them agreeing it was very frustrating etc. but would love to do something on paper. I think they’ve been pretty much every night for the last couple of weeks and my cat is hating it! As am I !
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...