Jump to content

How can I project a logo onto a screen via a laptop?


Recommended Posts

Not sure whether it's all worth the hassle, but basically I want to project the attached logo onto a (white) screen via my laptop.


However I want the logo only, not menus etc, and also it has to be quite large on the screen or it will look ridiculous (it's to replace a backdrop which can't be used in the particular location in the room).


When I tried it full screen on my laptop it got distorted to an oval :(


Anyone got any ideas?


I've also got a psd version of it, but I'm not sure that's any help ....


I know how to connect the laptop to the projector, that's not the issue, it's getting a reasonable size logo onto the screen with no distortion and no other stuff appearing as well as the logo.....


I'm not too bothered if you can see the lines of the square around the edges ....

Sue from what I know you just stick the logo into somethinglike MS PowerPoint and size it as you need to.

Then display trough projector. Projector should have controls to adjust perspective (like a corrective lens on an architectural camera) giving you a 'true' logo representation or bending it if you choose to do so.

If you haven't got PowerPoint, use OpenOffice.org or Prezi.com or even just Google Presentation.


They will all allow you to create a blank slide, add the image into it, and then show the slide without surrounding stuff.


If the image is distorted that may be down to the angle between the projector and the wall. You should be able to adjust this using the 'keystone' corrections on the projector menu.

Sadly I found that what I thought was an HDMI socket (?) on my laptop wasn't. It's apparently an analogue equivalent to it. Whatever that means :))


So I couldn't use the projector anyway as they only had one lead for it, which needed an HDMI socket :(


Bloody hell, my laptop isn't THAT old !!!

Fox - this is a similar product:

http://www.maplin.co.uk/vga-to-hdmi-convertor-with-audio-support-388962


As far as I can see, ed_pete's link won't help, because as with right-clicking's suggestion, it looks like just a cable and not a converter.


To reiterate, you don't just need a cable, you need a unit which can convert the analog VGA signal to a digital signal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • I'd be tempted to put up some sort of fence  to delineate the area and see what happens. Probably nothing.
    • Poundland have been there just over two years. 
    • Has anybody here bought some land from the council to become part of their garden? There are helpful guidelines on the Southwark website here including a PDF with associated costs, however the "valuation" element has absolutely no guidelines. It could be £500 or £50,000. You will already have spent £1000 on the process before finding out what they will charge you for the land - which would certainly be frustrating if it's not affordable for you. The land in question is a tiny patch immediately attached to the front of my property, approx 4 meters wide x 1 meter long. Would like to put a fence there to separate from the pavement and allow some privacy, keep the bins more tidy. The land is of no value to anybody else and is neglected currently - the council seems to have to stopped maintaining this area between the pavement and the houses on our street.
    • I suppose wind could have blown rubbish out of bins down into the pond. But I also counted three footballs and some smaller balls. Regrettably, there is also what seems to be a large dead carp or waterfowl, hard to tell at distance. I just hope the water quality is okay. I am not clear to what extent the pond is managed.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...