Jump to content

Recommended Posts

Hi


Render is not my field of expertise! The thermal render we used is "breathable" so not an issue. You are best speaking to the people who install but to share


1. We used external thermal render where we had existing render (upstairs back of house and upstairs down the side return.)


2. All the other rooms we used internal insulation in the external walls of those rooms only.


Hope that makes sense.

Good Afternoon,


My name is James Rixon and I am director of a local Architecture practice rixon architecture. We specialise in low carbon and sustainable design with a particular interest in retrofit.


Am really please to hear this being discussed as a topic, I have actually just responded to someone on a separate thread about internal wall insulation which I have copies below.


My current understanding is that yes you can heat your home with a heat pump, and there is a chance you may have to change your radiators due to output size. it will likely cost 10-16k to install and even though they are extremely efficient in terms of units of heat out compared to units of energy in you will end up paying more for your heating without additional measures due the cost difference between gas and electricity.






A few tips on internal wall insulation:

make sure all wall papers and substrates are removed before installation as these could encourage mould growth.

Consider ventilation improvements.

Think about junctions with wall, floor, ceilings and windows as there is a risk of creating an acute cold bridge.

Consider vapour permeable insulations to limit moisture getting trapped against the cold outer wall

and applying brick cream to the external wall which limits the adsorption externally

look at natural materials as carbon saving can be made not just in the operation of a building but also with that materials used.



We are currently developing tailored reports for clients for a reduced fee starting at ?200. This would include a site visit, and visual survey and then go on to outline an appropriate retrofit plan along with advice on how to approach this in stages. If this could be of use to you please get in touch.


All the best


James Rixon

cidolphus Wrote:

-------------------------------------------------------

> From a physics case this is correct but the drop

> off is marginal and does not impact the warmth of

> the house because air source heat pumps work best

> in insulated houses. (Heat pumps are used in the

> Nordic countries which are significantly colder

> than the UK.)

>

> My advice would be...until you have completed the

> following list of energy improvements....its not

> going to work that well in a victorian/edwardian

> house which just leaks heat. (No cavity wall

> insulation.)

>

> 1. Decent double glazed sash windows

> 2. Wall insulation - either inside or on the

> outside of the house...depending on if your house

> is brick or render. Insulation only needs to be on

> the external walls.

> 3. Under floor insulation plus and perhaps under

> floor heating - most houses are floorboards over

> dirt foundations not exactly robust from a heating

> perspective. (We have underfloor heating on the

> ground floor and radiators on the first and second

> floors.)

>

>

> The bit about heat pumps "working best" in well

> insulated houses is nonsense because ANY heat

> source "works best" in a well insulated building

> simply because there is less heat lost to the

> outside.

>

> The steps to minimising heating costs are:-

> (A) double glaze (or triple glaze all windows as

> they do in Scandinavia)

> (B) insulate every external wall and (

> © draft proof external doors. Do all that

> properly and you will save a massive amount.

>

> Heat pumps are over-hyped - similar to the hype

> that a "smart" will meter will save you money. A

> smart meter doesnt save you any money whatsoever.


I believe the problem is the classic UK problem, which is poor design and build standards in this country.

redpost Wrote:

------------------------------------------------------

> I believe the problem is the classic UK problem,

> which is poor design and build standards in this

> country.


The design and build standards in the UK a hundred years ago - which is when most of the houses around here were built - were pretty good.

  • 1 month later...

Can I thank everyone for their comments and suggestions on this thread. My apologies for not replying earlier - work pressure.


My house is not even close to well insulated. As one thread poster suggested, the ground floor boards are just laid over joists with no insulation beneath. The loft has minimum insulation and the external walls are not insulated at all. It feels like this is the right place to start and a no regrets place to invest.


I am still very much interested in installing this tech and will be keeping an eye on both ground source and air source pumps become more energy efficient, while I work on the insulation. I think the new Government scheme may encourage more investment in this sector.


It really feels like moving from fossil fuel is the way to go, but maybe that's in incremental steps for me. I'd really like this thread to keep going as the science develops, so all new thoughts and views would be great to hear. Thanks

We insulated, and changed all of our windows, etc... And now have just installed a hot water tank, which we'll connect to solar power (Solar PV). So this means our gas consumption will just be for heat...total cost will be less than 2K (though my husband did some of the work himself), as we can use our existing combi boiler just for heat. Putting in a ground source pump wasn't feasible nor was an air source one as it would require lifting up all of the floors, and we have a small garden. But at least this plan will reduce our carbon footprint and our gas and electricity bills overall. You can also get solar thermal and not need solar PV.

Dogkennelhillbilly Wrote:

-------------------------------------------------------

> redpost Wrote:

> --------------------------------------------------

> ----

> > I believe the problem is the classic UK

> problem,

> > which is poor design and build standards in

> this

> > country.

>

> The design and build standards in the UK a hundred

> years ago - which is when most of the houses

> around here were built - were pretty good.


Sorry, I was referring to new builds: missing insulation, cheap insulation (using glass wool rather than PIR), insulation stuffed in openings only so looks like whole wall insulated, poor airtightness, cheapo UPVC window frames and general poor quality of build.


When refurbing my house, I did all the insulation myself simply because I couldn't trust any builder to do it properly.

Nigello Wrote:

-------------------------------------------------------

> Thursday - you can save energy and at least some

> money by filling in the gaps of your floorboards

> with https://stopgaps.com/ , and also by lining

> curtains, blocking draughts around doors and

> windows with tape, etc.



I use StopGap, but my living room floor is still very cold. I do have some rugs.


I can't insulate the floor from underneath because my cellar is mostly filled with rubble, so I can't get at it. I believe this is from when the house was first built (it's an Edwardian/Victorian terrace, and someone once told me the builders put all their rubble into every fifth house's cellar. No idea if that is true).


Has anybody insulated their floor from above, by taking up the floorboards, and if so how did you do it?

I screwed in underneath the joists some marine ply strips (18mm thick, 1.2mm long, about 200mm wide) perpendicular to the joists

... lucky had enough clearance underneath to get a right angle cordless driver in. These strips will support the solid foam insulation between the joists and still allow airflow.


If one was to just stuff the hole subfloor with rockwool/glasswool, there would be no ventilation to the joists and they'd get damp and rot.


The joists were 220mm deep, so put first layer of 100mm celotex insulation ... loose fit, expanding foam the edges ... then but a second layer in + foam and topped off with 20mm insulation + foam


Wood is a good insulator, so no real need to insulate on top, but another 20mm wouldn't hurt if you have the depth.


Don't try and cut insulation exactly, just undercut it and get a good foam gun ... most builders don't realise cold air will just bypass insulation through gaps.


While you've got the floor up: make sure no rot, check any mid joist supports are good (usually a few bricks) and make sure air bricks are clear ... if you block off the ventilation to the subfloor, then you'll get rot.

I've insulated under my ground floor by cutting a small square hatch in the floorboards and then sliding about on my back pushing insulation up between the joists and holding it in place with wire netting stapled to the underside of the joists. Be sure to electrically bond the wire netting to any adjacent metal pipes, earths etc. This was years ago and it's made a substantial difference.
PS. I don't know your exact situation, but clearing out the cellar is the option I would explore. You can then insulate from underneath and avoid ripping up and replacing the floor ... it's a pain to get old floorboards up without damaging them and you may have to remove skirting as well.

redpost Wrote:

-------------------------------------------------------

> PS. I don't know your exact situation, but

> clearing out the cellar is the option I would

> explore. You can then insulate from underneath and

> avoid ripping up and replacing the floor ... it's

> a pain to get old floorboards up without damaging

> them and you may have to remove skirting as well.


I agree that would be the ideal option, but I suspect clearing out the cellar would be massively expensive.


Who would do that kind of work? A general builder?


My floorboards are a bit of a mishmash, and are painted white, so I'm not too bothered about damage as they need repainting anyway.

mac4 Wrote:

-------------------------------------------------------

> I've insulated under my ground floor by cutting a

> small square hatch in the floorboards and then

> sliding about on my back pushing insulation up

> between the joists and holding it in place with

> wire netting stapled to the underside of the

> joists. Be sure to electrically bond the wire

> netting to any adjacent metal pipes, earths etc.

> This was years ago and it's made a substantial

> difference.


Is there any reason why the netting needs to be wire, rather than plastic?


I have no intention of sliding about on my back beneath the floor 😂

I did my upper floors with wire mesh and rockwool, this was necessary for fire resistance since it will stay in place during a fire.


On my ground floor I used ply strips as I found wire mesh more fiddly in this situation and couldn't get my power stapler into the space. I was also able to bed the celotex slabs down on the ply strips with foam for airtightness.


Insulation is a big disruptive job, but it makes your house extremely comfortable if done well ... need to pay attention to ventilation and air tightness. On a cold winters day, around 7pm before the heating kicks in, my upper floors still have retained heat from the morning when the heating turned off 12h earlier.

Townleygreen Wrote:

-------------------------------------------------------

> With regard to Sue's comment about not wanting to

> slide about oin one's back under the floor, I have

> found a firm called Q-bot https://q-bot.co/

>

> who use a robot device to spray foam under the

> floorboards. Not sure, but could be a help?


Thanks, I'll have a look!


ETA: Unfortunately the robot appears to work from the cellar floor, which would be impossible in my case because of the rubble.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • Last week we had no water for over 24 hours and very little support from Thames Water when we called - had to fight for water to be delivered, even to priority homes. Strongly suggest you contact [email protected] as she was arranging a meeting with TW to discuss the abysmal service
    • The is very low water pressure in the middle of Friern Road this morning.
    • I think mostly those are related to the same "issues". In my experience, it's difficult using the pin when reporting problems, especially if you're on a mobile... There's two obvious leaks in that stretch and has been for sometime one of them apparently being sewer flooding 😱  
    • BBC Homepage Skip to content Accessibility Help EFor you Notifications More menu Search BBC                     BBC News Menu   UK England N. Ireland Scotland Alba Wales Cymru Isle of Man Guernsey Jersey Local News Vets under corporate pressure to increase revenue, BBC told   Image source,Getty Images ByRichard Bilton, BBC Panorama and Ben Milne, BBC News Published 2 hours ago Vets have told BBC Panorama they feel under increasing pressure to make money for the big companies that employ them - and worry about the costly financial impact on pet owners. Prices charged by UK vets rose by 63% between 2016 and 2023, external, and the government's competition regulator has questioned whether the pet-care market - as it stands - is giving customers value for money. One anonymous vet, who works for the UK's largest vet care provider, IVC Evidensia, said that the company has introduced a new monitoring system that could encourage vets to offer pet owners costly tests and treatment options. A spokesperson for IVC told Panorama: "The group's vets and vet nurses never prioritise revenue or transaction value over and above the welfare of the animal in their care." More than half of all UK households are thought to own a pet, external. Over the past few months, hundreds of pet owners have contacted BBC Your Voice with concerns about vet bills. One person said they had paid £5,600 for 18 hours of vet-care for their pet: "I would have paid anything to save him but felt afterwards we had been taken advantage of." Another described how their dog had undergone numerous blood tests and scans: "At the end of the treatment we were none the wiser about her illness and we were presented with a bill of £13,000."   Image caption, UK pet owners spent £6.3bn on vet and other pet-care services in 2024, according to the CMA Mounting concerns over whether pet owners are receiving a fair deal prompted a formal investigation by government watchdog, the Competition and Markets Authority (CMA). In a provisional report, external at the end of last year, it identified several issues: Whether vet companies are being transparent about the ownership of individual practices and whether pet owners have enough information about pricing The concentration of vet practices and clinics in the hands of six companies - these now control 60% of the UK's pet-care market Whether this concentration has led to less market competition and allowed some vet care companies to make excess profits 'Hitting targets' A vet, who leads one of IVC's surgeries (and who does not want to be identified because they fear they could lose their job), has shared a new internal document with Panorama. The document uses a colour code to compare the company's UK-wide tests and treatment options and states that it is intended to help staff improve clinical care. It lists key performance indicators in categories that include average sales per patient, X-rays, ultrasound and lab tests. The vet is worried about the new policy: "We will have meetings every month, where one of the area teams will ask you how many blood tests, X-rays and ultrasounds you're doing." If a category is marked in green on the chart, the clinic would be judged to be among the company's top 25% of achievers in the UK. A red mark, on the other hand, would mean the clinic was in the bottom 25%. If this happens, the vet says, it might be asked to come up with a plan of action. The vet says this would create pressure to "upsell" services. Panorama: Why are vet bills so high? Are people being priced out of pet ownership by soaring bills? Watch on BBC iPlayer now or BBC One at 20:00 on Monday 12 January (22:40 in Northern Ireland) Watch on iPlayer For instance, the vet says, under the new model, IVC would prefer any animal with suspected osteoarthritis to potentially be X-rayed. With sedation, that could add £700 to a bill. While X-rays are sometimes necessary, the vet says, the signs of osteoarthritis - the thickening of joints, for instance - could be obvious to an experienced vet, who might prefer to prescribe a less expensive anti-inflammatory treatment. "Vets shouldn't have pressure to do an X-ray because it would play into whether they are getting green on the care framework for their clinic." IVC has told Panorama it is extremely proud of the work its clinical teams do and the data it collects is to "identify and close gaps in care for our patients". It says its vets have "clinical independence", and that prioritising revenue over care would be against the Royal College of Veterinary Surgeons' (RCVS) code and IVC policy. Vets say they are under pressure to bring in more money per pet   Published 15 April 2025 Vets should be made to publish prices, watchdog says   Published 15 October 2025 The vet says a drive to increase revenue is undermining his profession. Panorama spoke to more than 30 vets in total who are currently working, or have worked, for some of the large veterinary groups. One recalls being told that not enough blood tests were being taken: "We were pushed to do more. I hated opening emails." Another says that when their small practice was sold to a large company, "it was crazy... It was all about hitting targets". Not all the big companies set targets or monitor staff in this way. The high cost of treatment UK pet owners spent £6.3bn on vet and other pet-care services in 2024 - equal to just over £365 per pet-owning household, according to the CMA. However, most pet owners in the UK do not have insurance, and bills can leave less-well-off families feeling helpless when treatment is needed. Many vets used not to display prices and pet owners often had no clear idea of what treatment would cost, but in the past two years that has improved, according to the CMA. Rob Jones has told Panorama that when his family dog, Betty, fell ill during the autumn of 2024 they took her to an emergency treatment centre, Vets Now, and she underwent an operation that cost almost £5,000. Twelve days later, Betty was still unwell, and Rob says he was advised that she could have a serious infection. He was told a diagnosis - and another operation - would cost between £5,000-£8,000.   Image caption, Betty's owners were told an operation on her would cost £12,000 However, on the morning of the operation, Rob was told this price had risen to £12,000. When he complained, he was quoted a new figure - £10,000. "That was the absolute point where I lost faith in them," he says. "It was like, I don't believe that you've got our interests or Betty's interests at heart." The family decided to put Betty to sleep. Rob did not know at the time that both his local vet, and the emergency centre, branded Vets Now, where Betty was treated, were both owned by the same company - IVC. He was happy with the treatment but complained about the sudden price increase and later received an apology from Vets Now. It offered him £3,755.59 as a "goodwill gesture".   Image caption, Rob Jones says he lost faith in the vets treating his pet dog Betty Vets Now told us its staff care passionately for the animals they treat: "In complex cases, prices can vary depending on what the vet discovers during a consultation, during the treatment, and depending on how the patient responds. "We have reviewed our processes and implemented a number of changes to ensure that conversations about pricing are as clear as possible." Value for money? Independent vet practices have been a popular acquisition for corporate investors in recent years, according to Dr David Reader from the University of Glasgow. He has made a detailed study of the industry. Pet care has been seen as attractive, he says, because of the opportunities "to find efficiencies, to consolidate, set up regional hubs, but also to maximise profits". Six large veterinary groups (sometimes referred to as LVGs) now control 60% of the UK pet care market - up from 10% a decade ago, according to the CMA, external. They are: Linnaeus, which owns 180 practices Medivet, which has 363 Vet Partners with 375 practices CVS Group, which has 387 practices Pets at Home, which has 445 practices under the name Vets for Pets IVC Evidensia, which has 900 practices When the CMA announced its provisional findings last autumn, it said there was not enough competition or informed choice in the market. It estimated the combined cost of this to UK pet owners amounted to £900m between 2020-2024. Corporate vets dispute the £900m figure. They say their prices are competitive and made freely available, and reflect their huge investment in the industry, not to mention rising costs, particularly of drugs. The corporate vets also say customers value their services highly and that they comply with the RCVS guidelines.   Image caption, A CMA survey suggests pet owners are happy with the service they receive from vets A CMA survey suggests pet owners are happy with their vets - both corporate and independent - when it comes to quality of service. But, with the exception of Pets at Home, customer satisfaction on cost is much lower for the big companies. "I think that large veterinary corporations, particularly where they're owned by private equity companies, are more concerned about profits than professionals who own veterinary businesses," says Suzy Hudson-Cooke from the British Veterinary Union, which is part of Unite. Proposals for change The CMA's final report on the vet industry is expected by the spring but no date has been set for publication. In its provisional report, it proposed improved transparency on pricing and vet ownership. Companies would have to reveal if vet practices were part of a chain, and whether they had business connections with hospitals, out-of-hours surgeries, online pharmacies and even crematoria. IVC, CVS and Vet Partners all have connected businesses and would have to be more transparent about their services in the future. Pets at Home does not buy practices - it works in partnership with individual vets, as does Medivet. These companies have consistently made clear in their branding who owns their practices. The big companies say they support moves to make the industry more transparent so long as they don't put too high a burden on vets. David Reader says the CMA proposals could have gone further. "There's good reason to think that once this investigation is concluded, some of the larger veterinary groups will continue with their acquisition strategies." The CMA says its proposals would "improve competition by helping pet owners choose the right vet, the right treatment, and the right way to buy medicine - without confusion or unnecessary cost". For Rob Jones, however, it is probably too late. "I honestly wouldn't get another pet," he says. "I think it's so expensive now and the risk financially is so great.             Food Terms of Use About the BBC Privacy Policy Cookies Accessibility Help Parental Guidance Contact the BBC Make an editorial complaint BBC emails for you Copyright © 2026 BBC. The BBC is not responsible for the content of external sites. Read about our approach to external linking.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...