Jump to content

Recommended Posts

Steve T,

With regard to your earlier post, are there pike in the big lake on PR?


I'm genuinely interested.


I've seen a fair few rats, both water rats and the normal kind, but was not aware of pike. How thrilling if there was a huge, ancient pike (not to mention wild cats) that lived on the Rye.

Little to tell. A little quirk of mine, I like to look at it most days and see how accurate it is. There is a squiggly graph at the bottom which tells you how much time to add or subtract depending on the month.


Using the graph, it was pretty accurate until the clocks went forward. Now it's way out, man.

I seem to have two teeny tiny birds living in a teeny tiny hole in the brickwork next to a large window sill.


They flew so fast in and out that I could see nothing except that they were tiny and perhaps brown with a white flash on the front. Will have to investigate.

One of the things about wrens is that they have very thin beaks, which are quite long in relation to their tiny bodies, or always look that way to me.


Also "rounder" bodies than pied wagtails I think.


And I think they are completely brown, not with a white flash anywhere.


But I don't have the energy to look up my bird book :)


I love wrens, had one who used to be about my (very small) garden a lot a few years back.

To me the distinctive things about wrens is that they are remarkably tiny in comparison with other small birds, and their bodies are very deep, if that's the right way of putting it - very round bodies, as Sue said.


Pied wagtails are black and white and not so small, so perhaps not?


Anyway, here are some pics


file.php?5,file=3997


file.php?5,file=3998

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...