Jump to content

Recommended Posts

Hi All,


I am at the end of my tether with my washing machine and wonder if anyone can offer any help. Basically, it's a Miele, so should be fantastic but actually it creates pilling on everything it washes (mainly cotton kids clothes). I've had two engineers out from Miele now and they disregard the piles of clothes that are ruined and keep repeating "it's not the machine" over and over. Miele management are standing by the opinion of their engineers, despite my sending pictures of clothes.


There's nothing wrong with the drum, I don't use powder, turn the spin down to 600/800. Never use the cotton wash. Wash towels and jeans separately... And yet I have cotton items go round once and they look like they're old!


Somebody please help! I daren't put the new clothes I've bought for summer into the stupid thing and I don't think I'm going to get any further with Miele. Aghhh!

I am adding my voice to the growing list of Spin Doctor plaudits. I have a Miele washing machine that has been pumping out the most foul smelling sulphorous odours of late. Called him yesterday evening - he came at 1300 today and has fixed it. Quick, friendly and brilliant service.

Thanks, I've given Steve a call and he's coming round on Monday. Hopefully he can get to the bottom of this but his first thought also seems to be too much detergent.


Does anyone else use the recommended amount of detergent (i.e. one capful) in a very water efficient machine?

I only use liquid. When I first got the machine I was using powder and Miele managed to convince me that that was the problem. To be honest though, if powder or certain liquids created this amount of damage, no one would ever buy them.
The problem is the water efficiency! Clothes are rubbing together in very little water. When there is more water in the machine, clothing is cushioned slightly and kept separate. I have a fairly new Bosch and just have to grit my teeth and use the aqua plus button on every wash (which makes the cycles longer) but it is worth it not to have clothes worn out so quickly.

JessM - I don't suppose you have the W5740 honeycomb do you?


Trouble is though that even on a test wash with half the amount of liquid, it still does it. I'm going to try another test with no detergent at all.


I also thought that the water efficiency was a good candidate for the cause but I still think that if everyone's machine did this, everyone would be complaining and therefore it must be specific to this machine. I can only use water plus on the harsher cycles, which I daren't use other than with towels. I suppose I could pour water in through the drawer?!

Definitely not overloading it, no.


The pilling is so bad that I think it has to be more than just how I am using the washer. Yesterday I washed a brand new soft cotton vest top of my daughter's on delicates with about two t-spoons of liquid and the result is something which I would genuinely be embarrassed to give to the charity shop.


I've even started thinking that maybe if it had somehow got sand into it, then that could be pushed into the drum when it washes. Miele don't look inside the machine though, they just plug a laptop into it, so I don't know if something like this would be picked up on.

Did you ever cleaned your washing machine inside. By clean I mean I use once a month a powder at the highest temperature which kills any germs mould andales it fresh and no smelly. I started doing that after few years back I saw in watchdog they were talking about wm being smelly and leaving clothes looking very bad after wash. Another thing I always make sure my washing machine doors and powder dispenser are always opened. Try when you wash to use DR. Beckmans color and dirt collector. It will keep colora not to run over in a wash but also helps to remove dirt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • You'd need to get a proper quote (or three) for instance removing a cast iron bath is a very different job from removing an acrylic one. Again what pipe work will be being joined into - matching old imperial pipes with modern metric ones is different from like to like, as is dealing with a copper or an iron distribution system. The amount (area) of retiling required is an issue, as will be the state of the wall behind the tiles. It may of course all be very plain sailing, or not. Have a first look at plumber recommendations on the relevant pages on this site. If it's all easy then 3 days work may be sufficient. But it could be a week if there are snags. 
    • Hi. Can anyone suggest a plumber for the job below? Replace bath tub with a shower enclosure, putting pipes to showerhead behind wall, re-titling damaged/removed tiles Also any idea of the costs involved for the labour as we will buy the items required?
    • Aria came round to fix my tub drain when I'd messed up the seal. Came within hours, fixed the tub, and ran a bath to make sure it was okay. Here's where the fun starts. While he was over, I asked him questions about the rest of the plumbing round the house. I had just moved into a Victorian home that was previously being rented. Unsurprisingly, we found another leak in the tub and a drip in the kitchen tap.  He came back the next day to put a better pipe in my bathtub and replace the kitchen sink. Painstakingly figured out how to replace the hard-to-access kitchen sink without cutting through the wood panel with the help of his builder friend, Mark. Answered all my questions and clearly knew his stuff. All this right before Christmas holidays! 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...