Jump to content

Recommended Posts

I'm looking to buy a howdens/ benchmarx kitchen - I think - as I understand they are cheaper than a kitchen showroom kitchen. However I am baffled as to how I find out how much it will cost. I need to know how much the kitchen will cost before I decide on the builder, so that I can budget accordingly for the building work. However you can't get prices, they will only be given to a builder. So, my kitchen units may cost ?8k or they may cost ?18k and I don't know until I have engaged a builder to fit the thing! Plus every builder asks which kitchrn I am going for, but I can't confirm as I don't know how much they each cost! Is there any way to find out the cost of a kitchen before engaging a builder? I don't want to waste a builders time, or worse, engage a builder, before knowing how much the kitchen is going to cost approx. can anyone tell me how I deal with this? Thanks a lot.

From my experience, Howdens only deal with trade, so you won't get a price from them.

If builders want to know what kitchen, they will know what's involved with Howdens as they are all the same carcassing I think. Some other kitchen types do require more involved fitting.

Prices: depends on how many units obvs and there is a range of styles so you won't know a final figure until you're a bit further down the line. I would say the ?8k figure is a lot closer to where you'll end up than the ?18k.

They do have a showroom in ED tho that is open to the public and I believe open on Saturday mornings.

We recently had a Howdens kitchen installed by our builder as part of a bigger project. For us at least they were ok to tell us the costs involved, although presumably that's because they were able to create a quote on our builder's account.


For what it's worth it cost about ?5.5k for Burford cabinets and doors, handles, a built-in microwave, wine fridge and waste disposal. Ours was quite a large kitchen with a long run of cabinets along one wall and an island. The quote was similar to Ikea, a little cheaper than Wickes and massively less than Magnet. We bought the worktops (quartz) separately from Bells on Lordship Lane after a tip on the forum. Was a good decision as they were cheaper than anyone else and did a great job with installation.


We are very happy with the end result - the kitchen looks amazing and has a genuine quality feel. I'd certainly recommend the Howdens units although for what its worth, we also had a quote from Bells for comparable cabinets and doors which were a little more expensive than Howdens but not by much.


If you set-up an appointment with Howdens (Kevin is the manager there I think), they should be able to give you some indication of the cost. I'd also suggest having a chat with Keith at Bells.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • You'd need to get a proper quote (or three) for instance removing a cast iron bath is a very different job from removing an acrylic one. Again what pipe work will be being joined into - matching old imperial pipes with modern metric ones is different from like to like, as is dealing with a copper or an iron distribution system. The amount (area) of retiling required is an issue, as will be the state of the wall behind the tiles. It may of course all be very plain sailing, or not. Have a first look at plumber recommendations on the relevant pages on this site. If it's all easy then 3 days work may be sufficient. But it could be a week if there are snags. 
    • Hi. Can anyone suggest a plumber for the job below? Replace bath tub with a shower enclosure, putting pipes to showerhead behind wall, re-titling damaged/removed tiles Also any idea of the costs involved for the labour as we will buy the items required?
    • Aria came round to fix my tub drain when I'd messed up the seal. Came within hours, fixed the tub, and ran a bath to make sure it was okay. Here's where the fun starts. While he was over, I asked him questions about the rest of the plumbing round the house. I had just moved into a Victorian home that was previously being rented. Unsurprisingly, we found another leak in the tub and a drip in the kitchen tap.  He came back the next day to put a better pipe in my bathtub and replace the kitchen sink. Painstakingly figured out how to replace the hard-to-access kitchen sink without cutting through the wood panel with the help of his builder friend, Mark. Answered all my questions and clearly knew his stuff. All this right before Christmas holidays! 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...