Jump to content

Recommended Posts

I can only speak for COC, and yes it's designated as Metropolitan Open Land (OS149). I'm no planning expert, but my understanding from this Southwark document is that using MOL land as a cemetery is consider as an appropriate use, therefore the current plans are permitted. If someone wanted to build there, the designation as MOL would prevent it.


http://www.southwark.gov.uk/download/downloads/id/6877/southwark_open_space_strategy_2013

That's usually with a view to salami slicing and partial development: this is exactly what happened in the 1980s and the Mid-Southwark Plan tried to separate off areas like the top-edge of Sydenham Hill Wood for development.


I think that's why the London Wildlife Trust chased Local Nature Reserve status for the areas, because it presumably offers stronger protection for green space than MOL.


The then GLC published a sort of "Domesday" series of green sites for every London borough - well worth looking out for as they show the same pressures that now face London's captive countryside (including former farmland that became cemeteries and parks)and gave in-depth information on the need for open spaces (preferably with wildlife potential) throughout London. It's what makes London different from many other densely inhabited cities.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...