Jump to content

Recommended Posts

I think the full joke is a man made of cork, with no arms and no legs.


But Bob has never renounced his legs or claimed to have been made of cork.


He did however claim that he has no arms. This is somewhat incongruous with his latest claim that he is a musician.


Anyway. In case you still haven't go it, the answer was supposed to be Bob.



Why SE5?


Because Cloak (I won't 'clear off' because i've spent sevreal hundred thousand pounds on buying a large property in this area.) would find it rather uncomplimentary.


I have good memory's of living in SE5 and my children were also born at KCH so no deliberate intention of dissing SE5. However since this tangential issue has been raised, both have their pro's and cons but out of choice I'd rather live in SE22 than SE5. My opinion based on my personal experience.

lozzyloz Wrote:

-------------------------------------------------------

> out of choice I'd rather live

> in SE22 than SE5. My opinion based on my personal

> experience.


Why use postcodes if your not a postman?


The best place to live has to be somewhere close to the intersection of the postcodes SE22, SE5, and SE15 although I think that's in someone's back garden off Ivanhoe Road.


Houses near to that are sandwiched between the Bellenden and Camberwell Grove conservation areas and a short hop from Lordship Lane. Best of all worlds and the closest point in SE22 to decent transport links and central London.


I get the impression that Mockney lives in the Camberwell part of that area. Jammy gid.


Can anyone think of a good name for that district? CamPeckDul Intersect doesn't quite do it...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...