Jump to content

Recommended Posts

Hi Jeremy


Agree with you that they're not great, nor the worst, just bland. My problem is also with density: a block with six flats is being replaced by one with 19. The proposed block is four storeys high at the front, whereas the original one is three.

If you're interested in signing a petition asking Southwark for further consultation (most people in Bromar seem not to have been aware of the proposals), will you pm me your address.


Thanks


Chris

  • 5 months later...

ok, so has anybody else spotted the 'for sale' sign now adorning this site (hard to miss)


has the council given up? before they leave it to fester for another few years i'd like to point out the escalating pigeon population that now lives in the ripped out roof.


james any news from the council? anyone care to tell the people who actually live by the dump, sorry site, within a 100 metres?

They haven't given up, the plan was always to sell the site!


The council may have drawn up the plans, but it was never their intention to do the development themselves. After all, these aren't council flats. Personally I am glad that at least something is moving.


Badminton House (the block above/behind the lovely "Payless Food & Wine") is also for sale, presumably for refurb followed by private sales.

thanks jeremy, that makes me feel a lot better. i'm just fed up with being surrounded by empty houses and the never ending building of the 'luxury' houses. i wonder who will buy in these turbulent times?


the pigeons are loving the abandoned site and wish the council would clean up the corner at least once a month. But most of all it's the near car crashes that I see everyday that really concern me... but that's a whole other story/thread.

  • 3 weeks later...
What's going on with Badminton House, too? I live in Cowdray House, on Quorn Road (the bit facing the train line, just off the road). There's a sign saying for sale. I always wondered about Badminton, the other flats are lovely but that block seemed left to rot. People had been living there til very recently, too.
  • 4 months later...
  • 10 months later...
Planning permission has been submitted for 6 x three storey, four bedroom houses. They look OK - pitched roofs and bay windows to (sort of) blend in with existing buildings. All rather uninspired, but could be worse, and a much better option than a big block of flats.
I saw this too, look fine. My only concern is that if the corner on bromar/pytchley becomes a blind spot agin transport for London (or whoever is responsible) will have to look at how to improve vision lines. I keep meaning to email the application people but otherwise I agree, all looks fine and they're clearly looking to benefit from bromar prices!
  • 4 months later...

The next planning committee 26 March will decide on application 12-AP-3563 "EAST DULWICH ESTATE SITE BOUNDED BY DOG KENNEL HILL QUORN ROAD PYTCHELEY ROAD AND ALBRIGHTON ROAD SE22"


A proposal for "Erection of two blocks of flats accommodating 27 flats (comprised of 'Gatebeck' a three storey building located to south west side of

Pytchley Road, between Felbridge and Gatcombe House with 9 flats, being 3 x 2-bed, 6 x 3-bed, and 'Southdown' on north east side

of Pytchley Road to east of Melbreak House, of four storeys with 18 flats, being 8 x 1-bed, 2 x 2-bed, 8 x 3-bed); and conversion of existing drying rooms across the Estate into 18 flats (12 x studio flats, 3 x 1-bed, 3 x 2-bed); (TOTAL 45 new flats in new build/conversion) and external landscaping work across the Estate as part of an overall regeneration programme; alterations to existing car parking areas in the proximity of the proposed new flats, and additional car parking to land adjacent to Wilton House and altered access and parking provision to Wheatland House."

Hi James,


Thanks for letting people on the forum know about this planning committee meeting. However, just to clarify, this application does not include the 1-11 Pytchley Road site (the derelict yellow brick block on corner of Bromar Road discussed on this thread). The two sites being discussed next week are:

1) the parking area on Pytchley Road near the traffic lights at the junction with Dog Kennel Hill. This was the site of Gatebeck House, which was knocked down 14 years ago to reduce the density of the estate.

2)the caged football 'kickabout' area and parking area on Pytchley Road opposite the junction with Quorn Road. This was the site of Southdown House, which was knocked down by the GLC in the 1970s because of problems of severe and persistent damp. The problems with water can still be seen today - in the permanent lake on the parking area, and the water trickling through the boundary walls and over the pavement around the P13 bus stop!

  • 4 months later...
Looks like work is finally underway on the site (corner of Pytchley Rd and Bromar Rd). Good to know that the existing eyesore will be gone soon. I believe there is asbestos in the building, so I don't fancy getting too close while the building is being demolished!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • Good morning, neighbours! We have around 1,000+ glasses like these from a café that just closed down. Not sure if anyone would like to keep some before we send them to charity. Please feel free to come and pick them up at 22 Upland Road, SE22 9EF anytime before 31st Oct😉    
    • What "stricter" consequences could there be for shoplifting (or any other crime) than being put into jail, do you think? Though our prisons are of course full enough already, without more people being shoehorned  into them.
    • Returning to the original question, I had my jabs at Tessa Jowell yesterday. I was early and I was  seen on time, and it was a lovely pharmacist who did them, but the admin beforehand (not by her) was a bit iffy. I was given forms to fill in but not told what to do with them afterwards, so I  presumed I had to take them into the consulting room, as the rest was supposed to be filled in by a clinician, but no! After some time had elapsed and I had found a seat (there was no information on where to sit either, so people were sitting in two separate areas, neither of which had many seats) my name was called and  the forms were taken behind the counter. Be aware if you don't have an appointment - even in the relatively short time I was there, three people turned up without appointments having been sent there by a GP (I presume) or having  previously been  asked by the pharmacy to come  back at a different time, and they were all sent away again because the pharmacy didn't have enough flu vaccine until the following day. I have no idea if this was due to a misunderstanding on the people's side, their GP's or the pharmacy's, but none of them were very happy, and one lady said she "couldn't keep coming back" 😭  At least one of them didn't seem to understand what he was being told, possibly due to a language issue. I felt quite sorry for the pharmacist, who was giving jabs all day on top of her usual workload but still managing to stay cheerful! Though she wasn't the one dealing with the unhappy people! I have a sore arm from the Covid jab (I chose to have the jabs in different arms), but no other ill effects so far, touch wood. 
    • Line speed and the strength of your Wi-Fi signal are two separate things.  The first is determined by the type of connection (fibre/copper etc) to the outside world and the second is the connection between the device (printer/TV/laptop/tablet etc) and the router. If you are connecting a device to the router using cables (as Alec1 is) then this is will give the best possible connection but isn't practical for many without a degree of upheaval and even then not all devices (tablets for example) will allow a wired connection. So you relying on the quality of the Wi-Fi signal from the router to the device and this will depend on the quality of the router, the type of Wi-Fi connection (the frequency), line of sight etc - many different things.  This is why some people opt for a "mesh" type setup which is supposed to give a solid quality of Wi-Fi signal around the house with little or no blackspots.  It's expensive though and still requires the devices that send and receive the signal (like the plug-ins you have) to be wired to the router.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...