Jump to content

Extension - Architect/ Builder/ advice!


Nikkikf

Recommended Posts

Hi


This is my advice and I expect lots of intelligent debate afterwards :-)


I had gone down the route of an architect for a similar build and after a while realised the cost and advice of an architect for me was a waste of money. The stage payments were expensive for the services I received and I stopped their services.


In the end I used a structural engineer along with a draughtsman to draw up the plans to my spec. I then shopped around and tendered to builders and managed the build/costs myself and it worked a very cost effective route.


Now I am not saying that my experience is common but if the build is run of the mill then you get these drawn up without expensive architects and using decent builders who have done similar builds. If you are however going in for a Grand Design then that's something else and go and get an architect.


Like I said I expect some debates but everyone is allowed an opinion.

Link to comment
Share on other sites

  • 3 weeks later...

I'm going down the same route as Montassa. Unless you are redesigning your house and looking for innovative ideas, I wouldn't bother with an architect.


I've engaged a structural engineer and a draughtsman too as mine is a simple extension ie moving the back wall back a few metres. It's about 1/3 of the price and allows me to throw more money on the actual build

Link to comment
Share on other sites

It is part of our usual process to arrange the plans including structural calcs. We go through a design stage which enables us to quote for what you actually want rather than a guessing game. When the quote is accepted and after all the details are confirmed including planning permission if required, we have construction drawings" produced along with structural overlays. No point in spending a lot of money on services you may not need.
Link to comment
Share on other sites

I'd say that if you want a bog standard extension and don't really care about design then just use a builder.


If you are spending most of your savings on the project I would get professional advice. Architects can offer a lot more than just a drawing service for planning submission.

Link to comment
Share on other sites

Hello,


I work with builders and engineers to draft technical plan drawings for planning permission. If you know what you want in terms of layout and if the area is not listed or a conservation area then applying for planning permission can be relatively straight forward. I have builders i can recommend or am happy to work with you and your chosen builder to draw up the existing and proposed drawings as required. For more information please see www.studiobeekhuis.com

Link to comment
Share on other sites

I can recommend Zang Banda as a structural engineer - got a recommendation from this site actually. Very impressed. I was out the day he came round to do the survey for three steel supports in different rooms. My plasterer was here though and he informed me he that Zang was here for just over 3 hours and was meticulous in his measurements etc, attention to detail etc. My plasterer said in his experience S.E's are often in and out in 15 mins.


The drawings were excellent and he then recommended a great builder for the install - Zak - who we are also going to be using again.


Here's his website


http://www.zhbdesignconsultantbeckenham.co.uk/

Link to comment
Share on other sites

Hi Nikki, Mc Govern Carpentry and Design who I have used, and highly recommend work alongside an architect. They carried out a kitchen and Bathroom Refurbishment for me, in my buy to let.

local, very fairly priced and great to work with, I have earmarked Mc Govern for my next venture

Mc Govern Office 0208 432 2247


Edited due to grammar error. Sorry

Link to comment
Share on other sites

  • 1 month later...

Hi,


I hope you are well.


I saw your post and wondered if you could recommend the builder that you used for your extension ? We will soon be looking to renovate our house in Dulwich and add an extension on the back.


Thanks in advance !


Oliver

Link to comment
Share on other sites

I had two extensions built. I used a posh architects firm initially - complete waste of money. Now I would always recommend finding the builder first. Any good builder will work with a structural engineer and architect. My builder, David O Brien, provided both these people, and they were excellent and great value for money. The whole project was an absolute delight. Let me know if you'd like his details.
Link to comment
Share on other sites

  • 2 weeks later...

Hello,


It's good to get a few quotes from different builders. I am a designer and I often use Ajax Builders who are a design and build firm, they do lots of residential work. They can also draw up the plans and put in for planning permission etc.


www.ajaxbuilders.co.uk


Contact Jack: 0788 6227480 or 0208 201 3626


Regards,

Francine

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • Thank you, he's pretty adamant a party wall agreement isn't needed so no chance of getting plans, he's been very cagey about what's being done. I've asked for the specific clause in the Party Wall Act that suggests he doesn't because I'm pretty worried. Is it just the chimney breasts that would fall under the act? He's insisting the others don't count as party walls.
    • Thanks  for the reminder nellie. Have today received two letters dated February 2024. Heading down to Highshore Road tomorrow to see if there's anything for us. I'm getting obsessive about missing/late arriving bills since having our phone and broadband cut off when we hadn't received (so hadn't paid) a bill from BT that had been posted to us. I now keep a note in my diary of when the various utility bills are expected, and phoning them when I think something is due, invariably they say the bill has been sent out. It shouldn't be so hard.
    • He’ll need to apply to building control if he’s removing a chimney breast, as that has to be signed off once the work is done. Make sure the joists for your floor are extended to full width of the room once the chimney breast is removed. Ours weren’t (by the previous owner when they removed the chimney breast in the kitchen) and the floor above was dipping by a few inches. 
    • Chimney breast removal definitely requires party wall agreement and if yours above is not being removed it will require steels to support the chimney breast above.  You should consult your own party wall surveyor and serve notices on your neighbour and they will be liable for the cost of your surveyor.  Also worth contacting the southwark building regs inspector for advice as removing a load bearing wall also requires steels to support the walls above and will require building regs. Has your neighbour shown you the plans to show how they are going to support your walls above?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...