Jump to content

Recommended Posts

Hi, has anyone done this? If so, what sort of issues and costs are we looking at? We have an Edwardian house that some muppet put a strange sort of 1940's fireplace in and we'd like to replace it with a more original style. The set up we have looks as though it did work as a fire at some point so I think the space is there. If anyone knows of a firm that does it all the better!

Thanks

Link to comment
https://www.eastdulwichforum.co.uk/topic/39847-reinstating-a-fireplace/
Share on other sites

we took our 1950's fire place out of our dining room and discovered the original space for the kitchen range behind it. Our builder inserted a new lintel to support the opening at this greater height and we got the sweeps in to check the chimney. We had a woodburner inserted in the space- the installer had to clear a bit of rubble that was stuck inside the chimney breast and remove one of those hat things off the top of the chimney on the outside which had been fitted for a gas fire.

So maybe first port of call is a sweep like Pearse and sons.


the 1940's fireplace might have been put in in the 1940's! People have always wanted the latest gadgets and styles, even then! I think our 1950's one had been the third to be installed in that particular place.


Matt at Casa in Bellenden Road is a fireplace expert and installer too.

Yes, we did this with our victorian semi on upland road. We unblocked the original and put a lovely edwardian metal one in. It cost about ?1500 all in but was worth it. We used Bob who was at the junction emporium just off LL. I think he's gone now though. Casa on bellenden road does all this stuff too.
  • 1 year later...

I used Bob a few years back and would like to get in touch with some more work for him.


The number on here doesn't work anymore, as the previous poster mentions he moved a while back. http://www.yelp.co.uk/biz/junction-emporium-london


But does anyone have his current number?


Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • You'd need to get a proper quote (or three) for instance removing a cast iron bath is a very different job from removing an acrylic one. Again what pipe work will be being joined into - matching old imperial pipes with modern metric ones is different from like to like, as is dealing with a copper or an iron distribution system. The amount (area) of retiling required is an issue, as will be the state of the wall behind the tiles. It may of course all be very plain sailing, or not. Have a first look at plumber recommendations on the relevant pages on this site. If it's all easy then 3 days work may be sufficient. But it could be a week if there are snags. 
    • Hi. Can anyone suggest a plumber for the job below? Replace bath tub with a shower enclosure, putting pipes to showerhead behind wall, re-titling damaged/removed tiles Also any idea of the costs involved for the labour as we will buy the items required?
    • Aria came round to fix my tub drain when I'd messed up the seal. Came within hours, fixed the tub, and ran a bath to make sure it was okay. Here's where the fun starts. While he was over, I asked him questions about the rest of the plumbing round the house. I had just moved into a Victorian home that was previously being rented. Unsurprisingly, we found another leak in the tub and a drip in the kitchen tap.  He came back the next day to put a better pipe in my bathtub and replace the kitchen sink. Painstakingly figured out how to replace the hard-to-access kitchen sink without cutting through the wood panel with the help of his builder friend, Mark. Answered all my questions and clearly knew his stuff. All this right before Christmas holidays! 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...