Jump to content

Recommended Posts

Baker's dozen



A baker's dozen, also known as a long dozen, is 13, one more than a proper dozen. The expression found its genesis in 13th-century England.


It is also known as Devil's dozen, because 13 is considered to be an unlucky number.


Origin



The oldest known source and most probable origin for the expression "baker's dozen" dates to the 13th century in one of the earliest English statutes, instituted during the reign of Henry III (r. 1216-1272), called the Assize of Bread and Ale. Bakers who were found to have shortchanged customers could be liable to severe punishment. To guard against the punishment of losing a hand to an axe, a baker would give 13 for the price of 12, to be certain of not being known as a cheat. Specifically, the practice of baking 13 items for an intended dozen was to prevent "short measure", on the basis that one of the 13 could be lost, eaten, burnt or ruined in some way, leaving the baker with the original dozen. The practice can be seen in the guild codes of the Worshipful Company of Bakers in London.


Many scholars have posited that the thirteenth item in the Baker's dozen was a superstition related to the sacrifice of the last item to the devil. Thus propitiated, the devil would not curse the original dozen. Often the thirteenth item would be marked with an X, or the letters NM (Latin for "non-mandicatus").


Modern


While modern bakers no longer fear medieval law, they have found other reasons for a baker's dozen, as seen in the tidy way 13 disks (loaves, cookies, biscuits, etc.) can pack a rectangle (baking tray) of appropriate proportions. Modern standard sized packing trays have a 3:2 aspect ratio, and the most efficient two-dimensional array is hexagonal close packing, which has sixfold symmetry, such that each baked item is equidistant from its six nearest neighbors. The corners of a cookie sheet heat up and cool off faster than the edges and interior, so any item placed near a corner will not bake at the same rate as the other items. A 4+5+4 arrangement provides the dense hexagonal packing while avoiding corners, and would have been discovered empirically by bakers with the goal of baking the maximum number per batch with optimal uniformity. Continued use also stems from tradition, and some customers see it as a sign of appreciation from the baker for continued patronage.


I hope this is help you to what is Baker's Dosen is.:)-D

HeidiHi Wrote:

-------------------------------------------------------

> yanlizkurt,

> Nerelisiniz? Ne Yapiyorsunuz?

>

> Very strange having a Turkish flag on here!




izmir'denim ben iyiyim tesekkur ederim?


siz nerelisiniz, Ne Yapiyorsunuz?

what is more strange a name Turkish Flag or name in flames!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...