Jump to content

Recommended Posts

Living on Oxenford Street, I always find it quite amusing the amount of lorries/HGV's which seem to think it's ok to travel up Bellenden Road, to Oxenford Street (a highly residential area with car's on both sides) and then getting stuck no matter which way they move (thanks to the notorious 1 way system).


This morning 2 HGV lorries - got stuck by Oxenford/Coplestone Road. All the cars parked either side just made it difficult to move any direction. The police had to be called to help guide the Lorries up the 1 way street, and hopefully on their way home.


All in all - it's taken around an hour (thanks to a reasonably quick response from the police).


Don't you think it's about time either the electronic maps, or the sign posting around this area improves. If it was just one or two incidents I wouldn't mind- but it's becoming too regular! What do you think?

You must have - at least it's all been sorted now.


The HGV's driver was a little annoyed, it's the first time he's been stuck anywhere. That's saying everything about the situation.


At least with a little co-operation from residents (for moving their cars) and of course the Police. It got rectified.


Hope the bus being delayed, didn't make you late :) Butterfly effect!


wonderwoman Wrote:

-------------------------------------------------------

> Gosh we must have caught the tail end of it then.

> Just been sitting on bus waiting for them to

> manoeuvre out onto the main didn't know it had

> been going on for an hour!

You've basically got the choice of either restricting width with bollards/gates, or restricting parking to give large vehicles room to turn.


The problem with the latter is that sometimes residential roads need access for large vehicles. Deliveries, skips, scaffolding, vehicle recovery, fire engines, etc.

We've had the same problem on Maxted Road with massive continental coaches from Peckham Lodge cutting up through Bellenden Road and along Maxted to try and get out onto East Dulwich Road.


With cars parked on all sides when they get to the junction with Nutbrook they often get stuck and perform increasingly balletic maneouvres to try and get out.


I mentioned it to James Barber some time ago about asking the owners of Peckham Lodge to tell coaches not to go that way but not sure it had any effect.

There seems to be problems always in this area with traffic. Just look at Bellenden Road by the shops. How often is there blockages around that area, with buses and cars waiting for each other to give way or move.


I feel the best course of action would be for the whole area, to be designated a 'residential area' with signs stating this placed around at prominent positions. Also maybe with the introduction of resident only parking during specific times (such as a window period say 6-9am) to discourage people to just park and leave their cars.


The bottle neck areas - just need serious restrictions - such as deliveries/short term parking (half an hour or so with no return within 2 hours), and only using 1 side of the road for this to aide the flow of traffic.


I mean - all those cars who park - around here - why can't they park nr Peckham Station in the car park on Chourment Road Car Park, or the Multi-story.


I know it probably factors down to cost - I'm sure a co-operative deal which mutually benefits everyone could be reached.

  • 9 months later...

Huggers Wrote:

-------------------------------------------------------

> We get them jammed in Nutbrook Street and have

> asked council to put advisory sign so lorries

> don't even start down that route. As for ringing

> the companies, there are loads of them, new every

> time!


An HGV ripped out the bollard on the corner of Nutbrook/Adys on Thursday, oil and concrete all down the road! They really need to find a way to close this as shortcut for HGVs/coaches before some more serious damage occurs. Has the council ever looked at this when they did the other one-way changes?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • You'd need to get a proper quote (or three) for instance removing a cast iron bath is a very different job from removing an acrylic one. Again what pipe work will be being joined into - matching old imperial pipes with modern metric ones is different from like to like, as is dealing with a copper or an iron distribution system. The amount (area) of retiling required is an issue, as will be the state of the wall behind the tiles. It may of course all be very plain sailing, or not. Have a first look at plumber recommendations on the relevant pages on this site. If it's all easy then 3 days work may be sufficient. But it could be a week if there are snags. 
    • Hi. Can anyone suggest a plumber for the job below? Replace bath tub with a shower enclosure, putting pipes to showerhead behind wall, re-titling damaged/removed tiles Also any idea of the costs involved for the labour as we will buy the items required?
    • Aria came round to fix my tub drain when I'd messed up the seal. Came within hours, fixed the tub, and ran a bath to make sure it was okay. Here's where the fun starts. While he was over, I asked him questions about the rest of the plumbing round the house. I had just moved into a Victorian home that was previously being rented. Unsurprisingly, we found another leak in the tub and a drip in the kitchen tap.  He came back the next day to put a better pipe in my bathtub and replace the kitchen sink. Painstakingly figured out how to replace the hard-to-access kitchen sink without cutting through the wood panel with the help of his builder friend, Mark. Answered all my questions and clearly knew his stuff. All this right before Christmas holidays! 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...