Jump to content

Recommended Posts

Wow that's amazing.


Not sure I could do that, but I did sail (as crew) on a tall ship (large brigantine) in my late teens, and climbing up into the crows nest at the top of the mast was pretty similar in all but height - without being able to harness on the way up - and while the ship is rolling in the sea beneath you (and no solid metal spikes to climb onto - all rope).


But those guys must encounter some wind at that height.

Slightly sweaty palmns watching that.


40 years ago as a Rag Week stunt, with three Climnbing Club colleagues, I climbed a large tower crane behind Fleet Street to hang a large banner from the end of the jib. Subsequently spent 10 years rock and mountain climbing and abseiling - in those days I thought I was immortal.


Last month I abseiled 150 foot from the top of the O2 arena, for charity - straight drop with no wall or rock face. That made me realise I'm no longer as young as I was, no longer immortal and that it's very very scary do such silly things. I certainly wouldn't want to go anywhere near that tower.


BTW - what would "elf & safety" make of it - the climber's technique in clipping off / on looked pretty dodgy to me.

what would "elf & safety" make of it - the climber's technique in clipping off / on looked pretty dodgy to me.


But he did have a guy beneath him, and I'm willing to bet that the guy below was clipped on (running a line) most of the time and he in turn was connected to that guy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • Use to be a place in Clapham.. second hand
    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...