Jump to content

Recommended Posts

My wife had her bike stolen this afternoon from outside the new Beauty Shop near the small Sainsburys at about 3pm.


Please let us know if you saw any suspicious activity. The bike was a hybrid with a basket on the front.


Last week my daughter had her bike stolen outside Dulwich Library.


Both bikes were locked. Obviously as the locations are close to each other it could be the same thief or gang so please take care with your bikes in that area.


Thx

Thanks - thats what i have and was hoping it was a sufficient deterrent, but wondered if that was misplaced?




Brulysses Wrote:

-------------------------------------------------------

> Kryptonite D locks are widely considered to be the

> best (one on each wheel), although pretty much

> nothing can stand up to an angle grinder...

Clearly not locked with a Kryptonite D lock - I would venture to suggest. I don't think any self-respecting bike thief would try to angle grind a lock in a place such as that. That's the whole point of them - they take ages and a hell of a lot of noise to cut through. Sounds more like a cable lock - one quick snip and it's rendered useless in 5 seconds.

robbin Wrote:

-------------------------------------------------------

> Clearly not locked with a Kryptonite D lock - I

> would venture to suggest. I don't think any

> self-respecting bike thief would try to angle

> grind a lock in a place such as that. That's the

> whole point of them - they take ages and a hell of

> a lot of noise to cut through. Sounds more like a

> cable lock - one quick snip and it's rendered

> useless in 5 seconds.


Kryptonites get cut with battery powered angle grinders all the time.

snowy Wrote:

-------------------------------------------------------

> robbin Wrote:

> --------------------------------------------------

> -----

> > Clearly not locked with a Kryptonite D lock - I

> > would venture to suggest. I don't think any

> > self-respecting bike thief would try to angle

> > grind a lock in a place such as that. That's

> the

> > whole point of them - they take ages and a hell

> of

> > a lot of noise to cut through. Sounds more like

> a

> > cable lock - one quick snip and it's rendered

> > useless in 5 seconds.

>

> Kryptonites get cut with battery powered angle

> grinders all the time.


I very much doubt that happens outside a shop during daytime.

Thanks for letting us know. Hope you can replace them with something good - there have been quite a few ladies bikes on here recently.


To the poster who said 'no wonder your bikes are getting stolen' - whilst its true that combination locks aren't the most secure method, we all know that there are hierarchies of bike theft from opportunistic theft where unlocked bikes are taken on a whim, through to targeted ones and so it was useful to understand what was in play here (and probably some middle ground - ie not walking around with an angle grinder, but also not just opportunistic!)


I also think that until bike theft is taken more seriously - both from a policing perspective (which given cuts will be difficult) but also and more relevant, from second hand trading platforms such as gumtree then moves to get people to use cycling as a more'primary' mode of transport will fail. I cycle to and from school, but as soon as i have to leave my bike in public anywhere i'm reluctant in case it or some component of it has disappeared when i get back.



Mick Mac Wrote:

-------------------------------------------------------

> Sorry all, yes, was locked to a bikerack outside

> Beauty shop. No CCTV covered that particular spot.

> Was a normal combination lock in both cases. Thx

I know, that is an option - but its not really work that i'm concerned about - more when i'm out and about going to things like kids parties, shopping, gyms etc. A folding bike would address this for now, though there are a limit as to how many places can accommodate folding bikes and they're also impractical to have with you when you go to places like supermarkets, but it would be nice to feel confident that you could return to it without components having been stripped off!


Anyway - it seems like there aren't a group out there targeting kryptonite type D locks for now on a daily basis so will just stick with that.


Mick Mac - hope you manage to get new bikes and sorry again to hear you had two stolen so close together it really is so annoying!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • You'd need to get a proper quote (or three) for instance removing a cast iron bath is a very different job from removing an acrylic one. Again what pipe work will be being joined into - matching old imperial pipes with modern metric ones is different from like to like, as is dealing with a copper or an iron distribution system. The amount (area) of retiling required is an issue, as will be the state of the wall behind the tiles. It may of course all be very plain sailing, or not. Have a first look at plumber recommendations on the relevant pages on this site. If it's all easy then 3 days work may be sufficient. But it could be a week if there are snags. 
    • Hi. Can anyone suggest a plumber for the job below? Replace bath tub with a shower enclosure, putting pipes to showerhead behind wall, re-titling damaged/removed tiles Also any idea of the costs involved for the labour as we will buy the items required?
    • Aria came round to fix my tub drain when I'd messed up the seal. Came within hours, fixed the tub, and ran a bath to make sure it was okay. Here's where the fun starts. While he was over, I asked him questions about the rest of the plumbing round the house. I had just moved into a Victorian home that was previously being rented. Unsurprisingly, we found another leak in the tub and a drip in the kitchen tap.  He came back the next day to put a better pipe in my bathtub and replace the kitchen sink. Painstakingly figured out how to replace the hard-to-access kitchen sink without cutting through the wood panel with the help of his builder friend, Mark. Answered all my questions and clearly knew his stuff. All this right before Christmas holidays! 
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...