Jump to content

House renovation - new kitchen design and complete chimney removal - where to start?


riggsy

Recommended Posts

Hello all


I'm one of those new generation of blokes that just doesn't have any clue when it comes to matters DIY but hoping some kind soul out there can guide me in the right direction.


My wife and I live in a lovely 3 bed terrace but the 3rd bedroom is tiny because of the chimney stack - we want to remove this and, with the neighbour's consent, the shared stack above the roof line (note this is the back chimney i.e. not the one that goes through the loft). We also want to go the full hog and remove the rest of the chimney downstairs into the kitchen and redesign and fit something new, add a window or two and big folding doors onto the v.v.v.v. small back garden.


Basically I haven't a clue where to start - essentially if the Chimney is a no go then may need to rethink everything but should I get a structural engineer round to assess this? do I simply get a builder in to advise on whether this is/or not possible and for all the design work do you need to appoint surveyors/architects or again do the builders do all of this?


Realise I need to get party wall agreements and so forth but at this stage I just want a wise head to have a look at all this and tell me if it is possible and what steps to follow.


Anyone done anything similar and can pass on some wise words/advise/recommendation for me? Best response gets a Riggsy beer voucher to be redeemed at any East Dulwich pub!


Thanks all

We thought about doing this exact same thing. For us, the only option would have been the complete removal of the stack and chimney. From memory, we were advised we would have definately needed building regs approval for this work and that would have required the submission of drawings and structural engineer's report saying it was fine.


So, it was certainly possible for us from a structural perspective, although your position may be different - you need to get some advice on this and I can recommend Goddens Structural, who have been recommended a number of times on this forum. They would be my first port of call. They may tell you "yes" or "no" in 5 mins.


If you do it then you'll then need to make good the roof and both floors. The removal of the stack and chimney may also cause some damage to your neighbour's property and you will be liable for this too.


We read up on this extensively and ultimately decided not to proceed with it because:


- the likely cost (we thought over ?5K after all the making good, scaffolding etc) was hard to justify given the fact the extra room it would create would not be that significant.

- it would be an enormous hassle and extremely dirty.

Hi there


We are having similar work done at the moment in that we are having a chimney breast and load bearing wall removed. We got a few builders round to quote and it seems that they tend to have a structural engineer that they regularly work with and they will give you the contact details for this person if they need plans to work from. So for us it was the builder first, then the structural engineer to draw up the plans and do any calculations necessary.


I'm pretty sure you will need to contact building control at the council because you are making structural changes and I would be tempted to ring them up and ask them for their advice in terms of the changes you are planning to make and the best way for you to approach it.


Building control will want to send a surveyor round to check everything once the work is done and this will cost a few hundred quid, ask building control to clarify this for you. I've pointed it out as it's one of those hidden costs that you don't necessarily think about at the outset.

Hi Riggsy,


Wow - sounds a very exciting project! I agree with Trizza - a decent builder will work closely with a structural engineer so get in touch with a builder first. And if you want a great one - try David O'Brien. He did 2 extensions on my last house and has just finished my kitchen. I enjoyed the whole experience so much I'd gladly do it all again! If you call him mention me (Vicky). 07960 938621

Riggsy,


I am a Chartered Civil Engineer with plenty of experience of this kind of work and the Party Wall Act. I would be happy to come and take a look if you like.


Mark Taylor B.Eng.(Hons) C.Eng. M.I.C.E.

TORCAL Ltd.

Consulting Engineers

Tel. 01622 745512 Mobile 07450 371508

email: [email protected]

Archived

This topic is now archived and is closed to further replies.

  • Latest Discussions

    • I’m pretty sure it was Brian of Advanced painting who renovated the outside perhaps he will know more he’s a long time resident
    • Would you like a copy of my spreadsheet? It's hours of fun.
    • Callout for help from any local experts here. Looking to find out more about the history of the property on the corner of Whateley Road and Ulverscroft road (with the green glazed bricks). Now a residential property, i'm told it was a bottle shop in days gone (the house was built around 1900) by and i'd like to learn more about the history of the business that was once here - name, photos, anything at all really! Seems to be very little from open source research so i'm hoping anyone with history in the area can provide any insight!  Starting here before i contact Southwark Archives or similar orgs to get any information and pictures (any advice here also would be welcome). Thank you
    • Portable ramps are available for businesses to use in this sort of situation, aren't they? I don't know whether one would be suitable for use here, or whether they have the space to store one. Lots of people have  permanent or temporary disabilities which mean they have to use crutches or a wheelchair.
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...