Jump to content

Recommended Posts

Hi all,


First time poster :)


Usually prefer just to read but came across this planning application and can't remember seeing it on here previously.


http://planningonline.southwark.gov.uk/AcolNetCGI.exe?ACTION=UNWRAP&RIPNAME=Root.PgeResultDetail&TheSystemkey=9553144


Planning reference: 14/AP/0115


Mr Barber seems quite good at bringing these matters to the fore - this ones seems to have escaped him! I'm a bit split! Been wanting to buy in the area for a while but this seems like it will cause a lot of disruption - I use the gym regularly.


Dave

Parking is a big problem already, I have a friend who lives opposite the leisure centre, Gym users park at the back of her flats (which is for residents only) so she comes home from work and has to park further up cp road.It would be completely naive to think there would be no problems although it certainly makes sense they have included basement parking in their planning permission.


If I could afford it Id probably buy one tho:)just saying!

My worry was the basement, which will extend the full size of the site. The amount of excavation required for this is going to be huge. Whilst the works are happening there will be a lot of parking issues as well as noise etc.


I will be emailing the planning officer but like I said, I actually like the development - I'm saving my deposit!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
    • I'm still completely unclear what happened, apart from that a car apparently crashed into a lamp post opposite the Co-op. I presume the one in Lordship Lane, though the OP doesn't say. Was it speeding? Did it swerve to avoid someone who ran into the road? Did something go wrong with its brakes or steering? Did the driver have a medical emergency or fall asleep or got  distracted by something? Was there something slippery on the road surface? Was the driver hurt? Were any passengers hurt? Were any pedestrians or other road users hurt? Were there any witnesses? 
    • confused by the question?
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...