Jump to content

Recommended Posts

Alan Dale Wrote:

-------------------------------------------------------

> Whilst I am proud of my work in Neighbours I must

> also draw your attention to my more lucrative

> roles in the OC and Ugly Betty.

>

> @Spymum- there aren't many family homes in

> Camberwell within our budget. We have seen a few

> in East Dulwich but whilst they seem a bit more

> affordable they are hampered by very limited

> transport links.

>

> It would defeat the object a bit if I moved down

> the Hill then had to walk back up every day to get

> to work.

>

> Are there any transport improvements expected?


Dear Mr Dale


While Dulwich does not have the transport hub that is Camberwell Green, we do have East Dulwich, North Dulwich and Peckham Rye stations within close proximity to most corners of our world, plus a lot of buses pass through. We can catch the 185 to Victoria, 176 to Aldwych and 40 to Aldgate via London Bridge, and the 12 to Oxford Circus. And the 63 to Kings Cross now that I think of it.


So no tube, but transport links not as bad as one might think.


Regards

Link to comment
https://www.eastdulwichforum.co.uk/topic/357-foxtons/#findComment-7362
Share on other sites

Agreed P's F. I'm a bit confused by Alan's observations too.


I'm not aware that Camberwell is more pricey than ED either, C'well has a higher crime rate and a singularly more down-at-heel feel to it.


As for transport links, many punters mean 'no tube' when they say limited public transport, but that's often because they're not familiar with the train service. It goes every 10 mins during the day. You don't have to be that clever to arrive when it'll only be a 3/4 min wait - just like the tube.


I work in Kentish Town, and it's far faster, more predictable and more comfortable by train than by tube on the Northern Line (down to Tulse Hill and back up on the Thameslink).


I'm sure there are places in ED you can live where buses aren't that accessible, but surely that's the same anywhere?

Link to comment
https://www.eastdulwichforum.co.uk/topic/357-foxtons/#findComment-7372
Share on other sites

I live on the Peckham Rye side of East Dulwich, so have the option of trains to Blackfriars, Victoria or London Bridge. Buses arriving every few minutes take me to the station in 5 minutes. I work in the city and have a 35 minute door-to-door trip every morning. That's the same commute time as when I was living in Chelsea.


I guarantee that trains are a whole lot more comfortable that tube trains, especially in the summer!

Link to comment
https://www.eastdulwichforum.co.uk/topic/357-foxtons/#findComment-7421
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Discussions

    • Thanks CHAV GPT, is there anything you don't know 😂
    • Use to be a place in Clapham.. second hand
    • If you want to change a radiator and it is the same size, pretty straight forward.  isolate by turning the two valves, one is straight forward hand twist, the other side you need to take the cap off and get an adjustable spanner and turn till closed.  Both clockwise. Use the same spanner to undo the large nuts that fix the radiator to the pipework, open the bleed valve, get a flatish container to catch the water which is likely to be a grotty black, sheets/plastic underneath to protect floor/floor covering.  Then jiggle off, tipping as quick as you an into your water container. Fingers crossed it will be the same back plate fitting.  If not you will have to take the old one off and fix the new one. Replacement is a reverse, allowing the rad to refill and let the air out. No naked flames involved. If it is a different size I can advise on that too. Lots on line too: https://www.toolstation.com/help-and-advice/how-to-guides/how-to-remove-radiator?gad_source=1&gad_campaignid=19747119835&gclid=CjwKCAiAkvDMBhBMEiwAnUA9BR26YwBA6kOfcR4-JVxfJEjWdhRk6j0imCNcsIfu064wHN54-cs10xoCZ4cQAvD_BwE Although this is for a pressurised (combi) system where you need to get it back to pressure.  Pretty simple.  I don't bother with jointing compound.    
    • Fair enough - I'm absolutely wrong on that one. 👍
Home
Events
Sign In

Sign In



Or sign in with one of these services

Search
×
    Search In
×
×
  • Create New...